Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Table of 1. Safety instructions ■ General safety instructions ■ Applicable safety regulations ■ Using the modules ■ Attention: Danger to life! ■ Electrical installation ■...
Page 3
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Mono S3 Mono S2 [144 half cells] [72 full cells] [72 full cells] [120 half cells] [120 half cells] [60 full cells] [60 full cells]...
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Safety instructions the manufacturer must be observed. General safety instructions Repair and operation of a PV system require sound expert knowledge. Therefore, all work on the sys-...
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Danger to life due to high voltage! ly careful, therefore, when transporting and tempo- rarily storing the modules and leave them in their High contact voltages can still occur in the inverter packaging until they are used.
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Installation of the module earthing holes are marked with a stamped eart- Ensuring safe installation hing symbol. Secure yourself and other persons against falls; do not carry out installation work in strong winds and prevent objects from falling if possible.
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Ensuring comprehensive fire protection Correct handling of AR glass modules The nano-porous coating on the glass surfaces of Under certain circumstances, the installation of the solar module reduces reflection losses. Compa-...
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Correct mounting location Secure mounting The module must not be mounted as overhead gla- In order to mount the modules as intended, they zing, e.g. on a facade. In addition to the module itself,...
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Ensure that the total area of all conductor loops is Example 1 - Clamping vane kept as small as possible to reduce voltages cau- sed by indirect lightning strikes. It is essential to subject the wiring to a thorough final check before the generator is put into operation.
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series MOUNTING-VARIANTS LOAD CAPACITY 2400 N/m² MODULE FRAME SELECTIVELY STORED MODULE FRAME STORED FLAT/AERODYNAMICALLY Solar module Mounting Solar module Mounting clamped clamped P series P series...
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Protecting the cables from damaging environ- Maintenance and cleaning mental influences Usually rainfall ensures that the modules are cle- Only use UV-resistant cable ties to fix the cables aned automatically.
Solar module mounting instructions Mono S3 ▪ Mono S2 ▪ M series ▪ P series Inspect the system regularly and check Note on liability and status of the instructions the system for: If there are deviations from the instructions con- ■...
Need help?
Do you have a question about the M Series and is the answer not in the manual?
Questions and answers