Settings; Windows 7/Windows Vista - Tascam US-125M Owner's Manual

Usb mixing audio interface

Hide thumbs Also See for US-125M:

Table of Contents

This interface uses the standard audio driver of the computer OS, so settings for

Windows Media Player, iTunes and all other audio application software is the same.

CAUTION

Before connecting headphones or speakers to this unit, minimize the volume using the

OUTPUT level knob. Sudden loud noises could damage hearing or cause other harm.

NOTE

If settings are changed while an application is running, the application might not

•

recognize the device. If this occurs, restart the application.

If there is no sound output even after correctly making the setting and following the

•

procedures below, restart the computer.

After making these settings, sound will be output from this interface, but sound

•

will not be output from the computer speakers or headphones connected to the

computer.

1 Quit all applications, and Open the Control Panel from the Start menu.

2 Open Sound.

NOTE

If the above item does not appear, click Hardware and Sound and it should appear.

3 Click the Playback tab, click Speakers USB Audio CODEC, and click the Set Default

button. This moves the green check mark to Speakers USB Audio CODEC.

4 Click the Recording tab, click Microphone: USB Audio CODEC, and then click Set

Default. The green checkmark is moved to Microphone: USB Audio CODEC.

Next, click Properties at the bottom right of the window.

Click the Levels tab of the Microphone Properties window.

4 – Settings

TASCAM US-125M

Table of Contents