Pioneer Elite SC-57 Operating Instructions Manual page 91

Symptoms Causes
Audio playback is The audio file currently being
undesirably stopped or played back was not recorded
disturbed. in a format playable on this
receiver.
The LAN cable is currently
disconnected.
There is heavy traffic on the
network with the Internet being
accessed on the same network.
When in the DMR mode,
depending on the external con-
troller being used, playback may
be interrupted when a volume
operation is performed from the
controller.
There is a connection routed
through a wireless LAN on the
same network.
Cannot access In case of Windows Media Player
Windows Media Player 11: You are currently logged
11 or Windows Media onto the domain through
Player 12. your PC with Windows XP or
Windows Vista installed.
In case of Windows Media Player
12: You are currently logged
onto the domain through your
PC with Windows 7 installed.
Remedies
Check whether the audio file was recorded in a
format supported by this receiver.
Check whether the folder has been damaged or
corrupted.
Note that there are cases where even the audio files
listed as playable on this receiver cannot be played
back or displayed (page 51).
Connect the LAN cable properly (page 28).
Use 100BASE-TX to access the components on the
network.
In this case, adjust the volume from the receiver or
remote control.
There may be a shortage of bandwidth on the 2.4
GHz band used by the wireless LAN. Make wired
LAN connections not routed through a wireless
LAN.
Install away from any devices emitting electromag-
netic waves on the 2.4 GHz band (microwave ovens,
game consoles, etc.). If this does not solve the
problem, stop using other devices that emit electro-
magnetic waves.
Instead of logging onto the domain, log onto the
local machine (page 48).
Symptoms Causes
Cannot listen to Inter- The firewall settings for compo-
net radio stations. nents on the network are cur-
rently in operation.
You are currently disconnected
from the Internet.
The broadcasts from an Internet
radio station are stopped or
interrupted.
The Home Media Gal- The remote control is not cur-
lery cannot be operated rently set to the Home Media
with the buttons on the Gallery mode.
remote control.
SIRIUS radio messages
Status messages Causes
Antenna Error The SIRIUS antenna is not
properly connected.
Check Sirius Tuner The SiriusConnect
not properly connected.
Acquiring Signal The SIRIUS signal is too weak
at the current location.
Subscription Updating Unit is updating subscrip-
tion.
Updating Channels Unit is updating channels.
Invalid Channel Selected channel is not avail-
able/does not exist.
Firmware Updating The SiriusConnect
firmware is being updated.
Additional information
Remedies
Check the firewall settings for components on the
network.
Check the connection settings for components on
the network, and consult with your network service
provider if necessary (page 78).
There are cases where you cannot listen to some
Internet radio stations even when they are listed
in the list of Internet radio stations on this receiver
(page 48).
Press HMG to set the remote control to the Home
Media Gallery mode (page 48).
Remedy
Check that the antenna cable is attached
securely.
TM
tuner is Check that the 8 pin mini DIN cable and AC
Adapter are attached securely.
Check for antenna obstructions and reposition
the SIRIUS antenna to get better signal recep-
tion. Use the Antenna Aiming option to optimize
the antenna position.
Wait until the encryption code has been updated.
Wait until the encryption code has been updated.
Select another channel.
TM
tuner's Wait for updating to finish.
13
91
En