Diagnosis; Disassembly - Pioneer PD-F1007 Service Manual

PD-F1007

7.2 DIAGNOSIS

7.2.1 DISASSEMBLY

Removal of the Servo Mechanism Assy GM
1 Remove the Bonnet. (Left and right
side: 2, rear side: 3)
2 Remove the wires from the MAIN
BOARD Assy. (9 places)
3 Remove the screws A (10 screws), and
remove the MAIN BOARD Assy.
Note) When the screws (6 screws) are
removed in this condition, the
mechanical unit can be removed as
one entity. Refer to "2. EXPLODED
VIEWS AND PARTS LIST".
4 Open the Hood, remove the screws B
(5 screws), disconnect the hooks of
Front Panel Assy and Hood (3 places),
and remove the Center Pole.
5 Remove the screws C (3 screws),
remove the link section D, and remove
the Arm Assy.
4
Hook
Open
48
MAIN BOARD ASSY
3
Screw A
CN351
Screw B ( 5)
Center Pole
Hood
3
Screw A
2
CN204
CN11
2
CN208
CN207
CN202
CN203
CN205
3
Arm Assy
5
Screw C
Link D
Screw A ( 6)
3
Screw A
CN401
Rear Base
Screw A
Screw C
5
Front