Related Manuals for KTM 250 XCF-W 2014
Summarization of Contents
DOCUMENT CONVENTIONS
1.1 Symbols used
Explains the meaning of specific symbols used in the document.
1.2 Formats used
Explains the typographical formats used in the document.
VEHICLE SETUP AND PREPARATION
2.1 Unpacking and initial vehicle setup
Instructions for unpacking the motorcycle and initial setup steps.
Triple clamp and fork leg adjustment
Positioning fork legs and tightening triple clamp screws for specific models.
Handlebar assembly and control positioning
Steps for installing handlebar components and positioning controls.
Indicator lamp connection (EXC-F EU, EXC-F AUS)
Connecting indicator lamps to sockets based on cable colors for specific models.
Indicator lamp connection (XCF-W)
Connecting indicator lamps for XCF-W models with specific cable colors.
Indicator lamp connection (EXC-F SIX DAYS)
Connecting indicator lamps for SIX DAYS models with specific cable colors.
Fuel tank removal and installation
Procedure to remove and install the fuel tank for setup.
Turn signal mounting and electrical connection
Mounting and connecting turn signals and related electrical components.
Front fender installation
Instructions for mounting the front fender.
Headlight mask and headlight assembly
Procedure for refitting the headlight mask and headlight assembly.
Front wheel installation
Procedure for installing the front wheel onto the motorcycle.
License plate holder assembly mounting
Mounting the license plate holder assembly with lamp, signals, and reflector.
Battery installation
Steps for correctly installing the motorcycle battery.
Battery charging procedures
Guidelines and warnings for charging the motorcycle battery.
Digital display and clock configuration
Setting display units, speedometer functions, and clock time.
Refueling guidelines
Instructions for refueling the motorcycle safely and correctly.
WORK PROCEDURES
Lift stand operation
Procedures for safely raising and lowering the motorcycle on a lift stand.
Headlight mask removal and refitting
Instructions for removing and refitting the headlight mask and headlight assembly.
Headlight setting check and adjustment
Checking and adjusting the motorcycle's headlight alignment and range.
Shock absorber installation
Steps for installing the rear shock absorber.
Front wheel installation
Procedure for installing the front wheel onto the motorcycle.
Front fender installation
Instructions for mounting the front fender.
Seat removal and mounting
Procedures for removing and installing the motorcycle seat.
Battery installation
Steps for correctly installing the motorcycle battery.
Battery charging procedures
Guidelines and warnings for charging the motorcycle battery.
Battery charging preparation and connection
Preparatory steps and main procedure for connecting the battery charger.
Fuel filler cap operation
Procedures for opening and closing the fuel tank filler cap.
Refueling guidelines
Safety instructions and procedure for refueling the motorcycle.
MODEL-SPECIFIC SETTINGS
3.17 EXC-F EU, EXC-F AUS, XCF-W settings
Setup instructions specific to EXC-F EU, EXC-F AUS, and XCF-W models.
3.17.1 Setting kilometers or miles
How to set the unit of measure (kilometers or miles) on the display.
3.17.2 Adjusting speedometer functions
Instructions for activating or deactivating speedometer display functions.
3.17.3 Setting the clock
Procedure for setting the time on the motorcycle's display.
3.18 EXC-F SIX DAYS settings
Setup instructions specific to the EXC-F SIX DAYS model.
3.18.1 Setting kilometers or miles
How to set the unit of measure (kilometers or miles) for SIX DAYS model.
3.18.2 Setting speedometer functions
Instructions for activating/deactivating speedometer functions for SIX DAYS model.
3.18.3 Setting the clock
Procedure for setting the time on the SIX DAYS model's display.
SUBSTANCES AND AUXILIARY MATERIALS
Fuel specifications
Information on recommended unleaded super fuel grades and ethanol content.
Long-life grease recommendation
Information on recommended long-life grease for maintenance.
Need help?
Do you have a question about the 250 XCF-W 2014 and is the answer not in the manual?
Questions and answers