Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for FLYGT 4640
Summarization of Contents
DATA PLATE INTERPRETATION
GENERAL DATA PLATE
Explains the general data plate markings and their meanings.
APPROVAL PLATES
Details various approval plates like EN and FM standards.
PRODUCT DESCRIPTION
General Description
Provides a general overview of the mixer and PP-pump features.
Applications
Lists intended uses for mixers and PP-pumps in various industries.
Design
Cable entry
Describes the cable entry system and its sealing mechanism.
Junction box
Details the sealed junction box and its components.
Motor
Explains the squirrel-cage induction motor specifications.
Monitoring equipment
Describes integrated thermal contacts and sensors.
Shaft
Details the motor shaft and its sealing.
Shaft seals
Explains the mechanical face seals used.
Bearings
Describes the type and lifespan of bearings used.
Oil casing
Explains the function of the oil casing for lubrication and cooling.
Propeller
Details the propeller design, blades, and angle adjustment.
Flush protection
Describes accessories for water or air flushing systems.
Cutting rings
Explains cutting rings for preventing hub area clogging.
Seal protector
Describes seal protectors to prevent clogging.
Fixing plate
Details the two types of fixing plates available.
Cooling jacket
Explains the optional external cooling jacket.
Vortex protection shield
Describes shields to avoid vortex formation.
Jet ring for mixer
Explains the jet ring's function for mixers.
Inlet cone for PP-pump
Details the inlet cone for PP-pumps.
Discharge connection for PP-pump
Explains the discharge connection's function.
Guiding equipment for PP-pump
Describes guiding equipment for PP-pump installation.
Installation for PP-pump
Details the PP-pump's installation method.
TRANSPORTATION AND STORAGE
Safety precautions
Lists essential safety measures for handling and storage.
Handling equipment
Details requirements for lifting and moving the mixer.
INSTALLATION
Installation alternatives for mixers
Describes different methods for mixer installation.
Installation in horizontal or angle position on the guide bar
Explains guide bar installation methods and angles.
Flange mounted mixer
Details the flange mounting method for mixers.
PP-pump installation
Outlines the procedure for installing the PP-pump.
ELECTRICAL CONNECTIONS
Motor cable
Provides guidance on connecting the motor cable and VFD considerations.
Monitoring equipment
Explains connection of sensors for monitoring.
Capacitive leakage sensor CLS-30 and leakage sensor FLS (built in version).
Details installation of leakage sensors for oil and stator casing.
OPERATION
Before starting
Lists checks and procedures before initial operation.
During operation of mixer
Describes operational checks and potential issues for mixers.
During operation of PP-pump
Details operational checks and potential issues for PP-pumps.
CARE AND MAINTENANCE
Safety precautions
Lists critical safety measures for maintenance tasks.
Service
Outlines service procedures and intervals.
TOOLS AND ACCESSORIES
Flush protection
Details the installation of flushing devices.
Start and control equipment
Mentions starting and control equipment options.
Seal protection
Describes the seal protection component.
Cutting rings
Explains assembly of cutting rings.
Cooling jacket
Details the cooling jacket and its installation.
Fault Tracing (Troubleshooting)
The machine fails to start
Guides on diagnosing start-up failures.
The machine starts but motor protection trips
Helps troubleshoot motor protection tripping issues.
The machine starts-stops-starts in rapid sequence
Assists in resolving rapid start-stop cycles.
Need help?
Do you have a question about the 4640 and is the answer not in the manual?
Questions and answers