Advertisement

22in Recycler® Lawn Mower
Model No. 20071—Serial No. 270000001 and Up
Model No. 20071A—Serial No. 270000001 and Up
Model No. 20072—Serial No. 270000001 and Up
Model No. 20072A—Serial No. 270000001 and Up
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer,
or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 identifies the
location of the model and serial numbers on the product.
Figure 1
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 2
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Important: This engine is not equipped with a
spark arrester muffler. It is a violation of California
Public Resource Code Section 4442 to use or operate
the engine on any forest-covered, brush-covered, or
grass-covered land. Other states or federal areas may
have similar laws.
This spark ignition system complies with Canadian
ICES-002
The enclosed Engine Owner's Manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory rated by the engine
manufacturer in accordance with SAE J1940. As configured
to meet safety, emission, and operating requirements, the
actual engine horsepower on this class of lawn mower will
be significantly lower.
Register at www.Toro.com.
Form No. 3357-437 Rev A
Operator's Manual
Warning
CALIFORNIA
Proposition 65 Warning
Original Instructions (EN)
Printed in the USA.
All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Recycler 20072 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction to Toro Mower Operation
Understanding the Safety Alert Symbol
Explains the safety alert symbol and its importance for hazard warnings.
Locating Model and Serial Numbers
Guides users to locate the mower's model and serial number plate for reference.
California Proposition 65 Warning
Informs about California's warning regarding engine exhaust and reproductive harm.
Engine Owner's Manual Reference
Directs users to consult the engine manual for emission system details.
Essential Mower Safety Precautions
General Operation Safety Guidelines
Provides essential safety precautions for operating the lawn mower safely.
Safety Measures for Slope Operation
Details critical safety measures for mowing on inclines and uneven terrain.
Safety Protocols for Children
Emphasizes keeping children away from the mowing area for their protection.
Safe Gasoline Handling Procedures
Offers crucial safety advice for handling flammable gasoline to prevent fires.
Safety and Instructional Decals
Importance of Safety Decals
Highlights the importance and location of safety and instructional decals on the mower.
General Service Safety Precautions
Safety During Maintenance
Lists safety precautions to follow during general maintenance and service procedures.
Mower Setup Procedures
Unfolding the Handle
Provides step-by-step instructions for unfolding the mower's handle.
Product Overview and Initial Checks
Filling the Engine with Oil
Details the procedure for adding the correct amount of oil to the engine.
Identifying Product Components
Identifies key parts of the lawn mower using a diagram for user reference.
Mower Operation Basics
Filling the Fuel Tank Safely
Explains how to safely fill the fuel tank with unleaded regular gasoline.
Checking Engine Oil Level
Describes the process to check and maintain the engine oil level.
Adjusting the Cutting Height
Cutting Height Adjustment Procedure
Details how to adjust the mower's cutting height for desired lawn appearance.
Starting the Engine
Engine Starting Sequence
Outlines the steps, including priming, to start the mower's engine.
Mower Drive and Stopping
Self-propel Drive Operation
Explains how to engage and disengage the self-propel drive system.
Engine Stopping Procedure
Details the method to safely stop the engine using the blade control bar.
Installing the Grass Bag
Provides instructions for attaching the grass bag to the mower.
Side-discharging Clippings
Installing Side Discharge Chute
Details the steps to install the side discharge chute for clippings.
Operating Tips for Best Results
General Mowing Best Practices
Offers general advice for efficient and safe lawn mowing.
Cutting Grass Techniques
Provides guidance on cutting grass height, conditions, and techniques.
Cutting Leaves Management
Advises on effective methods for mowing leaves on the lawn.
Mower Maintenance Schedule
Recommended Maintenance Schedule
Outlines a schedule for routine maintenance tasks for the mower.
Preparing for Maintenance Tasks
Disconnecting the Spark Plug Wire
Details the safety step of disconnecting the spark plug wire before maintenance.
Replacing the Air Filter
Air Filter Replacement Procedure
Provides instructions for replacing the air filter on the mower.
Engine Oil and Gear Maintenance
Engine Oil Change Procedure
Details the steps for draining and refilling the engine oil.
Lubricating Wheel Gears
Explains the process for lubricating the mower's wheel gears.
Replacing the Mower Blade
Blade Replacement Procedure
Details the steps and precautions for replacing the mower blade.
Adjusting and Cleaning the Mower
Self-propel Cable Adjustment
Guides users on how to adjust the self-propel drive cable for proper function.
Mower Cleaning Procedure
Provides instructions on how to clean the mower effectively after use.
Mower Storage and Retrieval
Preparing Mower for Storage
Outlines steps for preparing the mower for long-term storage.
Folding the Handle for Storage
Details the procedure for folding the handle for compact storage.
Post-Storage Setup Steps
Describes the necessary steps to take before using the mower after storage.

Table of Contents

Save PDF