Table of Contents
Advertisement
Quick Links
Operating Instructions
Silage trailers
CAREX 370 S
CAREX 390 K
SHUTTLE 370 S
SHUTTLE 390 K SHUTTLE 430 K SHUTTLE 470 K
Series:
Type:
Type of document:
As of:
Document number
CAREX 410 S
CAREX 430 K
SHUTTLE 410 S
2-134
SL11
Original operating instructions
201703 en
BTA_SL11_CAREX+SHUTTLE_201703_en
CAREX 450 S
CAREX 470 K
SHUTTLE 450 S
CAREX 490 S
CAREX 510 K
SHUTTLE 490 S
SHUTTLE 510 K
Advertisement
Table of Contents
Related Manuals for bergmann SHUTTLE 450 S
Summarization of Contents
1 General
1.1 Identification
Identifies vehicle models and provides key information.
1.2 Manufacturer
Details and contact information for the manufacturer.
1.5 Preface
Introduction, general notes, and importance of operating instructions.
1.5.1 Instructions for work safety
Essential safety instructions and warnings for operating the vehicle.
2 Notices for the User
2.1 Product Liability, Obligation to Inform
Details on product liability and user obligations.
2.3 General Information
General operational guidelines and safety notices.
2.3.1 Intended Use
Specifies authorized use and limitations of the trailer.
2.4 Designation
Information on vehicle identification number and CE symbol.
2.5 Technical data
General technical specifications and safety limit values.
2.6 Warning Symbols and Notice Stickers
Explanation of warning symbols and notice stickers for safety.
2.7 Safety and Accident Prevention Requirements
Fundamental safety rules for vehicle operation and maintenance.
3 Initial Start-up and Functions
3.1 Vehicle Functions
Overview of the vehicle's operational principles and main functions.
3.3 Coupling to the Tractor
Instructions and safety warnings for coupling the vehicle to the tractor.
3.4 Jack Stand
Safety and operational guidelines for using the jack stand.
3.5 Drawbar
Information and procedures for adjusting the drawbar height.
3.6 PTO shaft
Safety instructions and procedures for PTO shaft coupling and operation.
3.7 Pick-up
Overview of the pick-up unit, its components, and operation.
3.9 Cutting Unit
Information on the cutting unit, its safety, and operation procedures.
3.12 Forced Steering
Explanation of forced steering systems and critical safety notices.
3.17 Hydraulics
Safety warnings and instructions for the hydraulic system.
3.18 Terminal
Introduction to the terminal unit and its user interface.
4 Operating the Vehicle
4.1 Loading Procedure
Step-by-step guide for loading material into the vehicle.
4.2 Unloading Procedure
Procedures for unloading material from the vehicle.
4.3 Driving on Roads
Safety requirements and checks before driving on public roads.
4.3.1 Set Vehicle Parts in Driving Position
Steps to set vehicle components to the correct driving position.
4.4 Weights and Capacity Information
Important information regarding vehicle weight limits and capacity.
5 Care and Maintenance
5.1 General:
General safety and precautions for performing maintenance work.
5.3 Maintenance Schedule
Overview of maintenance tasks and intervals for the vehicle.
5.4 Screw torques
Table of standard torque values for various bolts and screws.
5.7 Tires and Wheels
Guidelines for approved tires, rims, and tire repair procedures.
5.8 Axles
Important safety notes and maintenance procedures for the vehicle axles.
5.9 Air Brake System
Information and checks required for the air brake system.
5.11 Drive
Overview of the drive system, including PTO shaft maintenance and lubrication.
5.13 Cutting Unit
Information on cutting unit knife adjustment and overall unit adjustment.
5.17 Lubrication
General guidelines for lubrication, types of lubricants, and disposal procedures.
5.18 Malfunctions
Table listing common malfunctions, their causes, and solutions for troubleshooting.
Need help?
Do you have a question about the SHUTTLE 450 S and is the answer not in the manual?
Questions and answers