Advertisement
Table of Contents
- 1 Table of Contents
- 2 Introduction
- 3 General Indications
- 4 Technical Information
- 5 Installation Steps
- 6 Thermodynamic Solar Panel Installation
- 7 Placing Ecoheat
- 8 Connection between Ecoheat Td and Panels
- 9 Hidraulic Connection
- 10 Electrical Connection
- 11 Comissioning. Controller
- 12 Warranty Conditions
- Download this manual
Advertisement
Table of Contents
Related Manuals for Climer ECOHEAT TD EH200TD
Summarization of Contents
2. General Indications
2.1. Safety notes
Highlights potential hazards and installer responsibilities to ensure safe operation.
2.2. Installer's qualification
Specifies the necessary certifications for personnel involved in installation and coolant handling.
2.3. Package contents
Lists all components included in the ECOHEAT system package for verification.
2.4. Indications about transport and unpacking the unit
Provides guidelines for safe transport, handling, and initial inspection of the unit.
3. Technical Information
3.1. Operating Principle
Explains the thermodynamic cycle and energy transfer process of the ECOHEAT TD system.
3.2. Dimension drawings
Presents visual diagrams illustrating the unit's physical dimensions and access points.
3.3. Technical data
Compiles key technical specifications for the heat pump, electrical components, and panel.
5. Thermodynamic Solar Panel Installation
5.1. Site selection
Offers advice on choosing the best location for the thermodynamic panel to maximize performance.
5.2. Anchoring panel
Details the necessary anchoring elements and the procedure for securing the panel.
7. Connection Between ECOHEAT TD and Panels
a. Pipeline installation
Describes the process of measuring, cutting, and preparing copper pipes for refrigerant lines.
b. Join refrigerant pipes to the Panels and Ecoheat
Details the method for connecting the refrigerant pipes to the panels and the main unit.
c. Nitrogen test and cleaning procedure
Outlines the steps for performing a nitrogen pressure test and cleaning the system.
d. Vacuum
Details the procedure for creating a vacuum within the installation to remove air and moisture.
e. Coolant filling
Explains how to correctly fill the system with refrigerant after vacuuming.
10. Comissioning. Controller.
10.1. User Interface Description
Explains the meaning of various symbols and icons displayed on the controller's interface.
10.2. Installation- Switching on
Guides on how to turn on the system after completing the installation and filling the tank.
10.3. Switching OFF
Provides instructions on the correct procedure to safely switch off the system.
10.4. Unlocking the keypad
Details the process to unlock the controller keypad when it automatically locks.
10.5. Displaying the operating mode
Explains how to view the currently active operating mode of the ECOHEAT system.
10.6. Changing operating mode
Outlines the steps to select and confirm a different operating mode for the unit.
10.7. ECO Mode
Describes the ECO operating mode and how to adjust its temperature setpoint.
10.8. AUTO Mode
Explains the AUTO operating mode and how to adjust its temperature setpoint.
10.9. OVERBOOST Mode
Details the OVERBOOST mode for rapid heating and how to cancel it.
10.10. Photovoltaic Input
Explains the system's functionality when connected to a photovoltaic input or for Off Peak Rates.
10.11. Displaying/deleting compressor functioning hours
Guides on how to view and reset the compressor's operational hours.
10.12. Antilegionella
Describes the anti-legionella feature, its purpose, and how it operates.
10.13. Alarms
Lists common system alarms, their meanings, and initial troubleshooting actions.
Need help?
Do you have a question about the ECOHEAT TD EH200TD and is the answer not in the manual?
Questions and answers