Table of Contents
Advertisement
T H E
R E S U L T
V I E W
. When you click the Reset Selection button, the edit
Select value range
boxes will be set back to their default settings. As explained above, the
selected value range will only take effect after you click on the
button.
Chart
5.11
Printing Results
In order to print the result view, select the menu option
setup the page layout from the windows menu
5.12
If No Data is Shown Even if the Result File Exists...
It is rare, but it may happen that your result file contains field names
different from those expected by the OPERA™ Control Center (e.g. if you
started it with a corrupt result file). In this case the OPERA™ Control center
will not show any useful data. However it is easy to cope with this: select
View|Reset Field Names
names used by the Control Center with those in the result file. If this does
not help, try to clear the result file as described before and then repeat this
step and restart the measurement. After the first new results are available,
the new field names will be read from the result file.
Start|Settings|Printers
from the menu. This will synchronize the field
15
Refresh
File|Print
. Please
.
Advertisement
Table of Contents
