Table of Contents
Advertisement
T H E
R E S U L T
V I E W
Limit Filters will filter out all results where one or several parameters are
exceeding a user definable limit. Connection filters will allow you to filter
the results depending on which resources have been involved to originate
and terminate the call. For both filter types you may combine several simple
filters using Boolean AND/OR operators in order to form complex filters.
If you want to specify a Connection Filter, use the dialog that appears after
clicking on the menu
. The Connection Filter
Filters|Edit Connection Filter
dialog is shown in Figure 5.3. For each Condition and Resource Name
option there are drop down fields available. When you confirm your filter
selection with the OK button, the filter condition is immediately applies on
the result view. To switch this filter on and off use the menu
Filters|Apply
.
Connection Filter
Figure 5.3: The Connection Filter dialog window.
In order to specify a Limit Filter use the dialog that appears after clicking on
the menu
. This dialog allows you to select the
Filters|Edit Limit Filter
parameters which shall be filtered by drop down list boxes and to specify
the limits by editing a regular edit field. Figure 5.4 shows an example where
a threshold for the PESQ MOS value has been defined. After confirming this
filter setting by clicking on the OK button, the result view will show only
those measurements that fulfill the chosen condition. To switch this filter on
and off use the menu
Filters|Apply Limit Filter
.
Figure 5.4: The Limit Filter dialog window.
10
Advertisement
Table of Contents
