OPTICOM OPERA Control Center Server Software V3.5 User Manual page 14

T H E R E S U L T V I E W
your system, e.g. if you have not purchased PESQ, the PESQ result values
will not be available in the result view, as a consequence. Most measured
parameters correspond to values determined by OPERA™. Please refer to the
OPERA™ manual for a detailed description.
Column Title Description
Comment The comment which is related to the command.
CommentO The comment which is related to the originating resource.
CommentT The comment which is related to the terminating resource.
Origin The resource name of the interface which originated the call.
Termination The resource name of the interface which terminated the call.
Index A sequential index of the test measurements
Time Time in UTC at which the command was started.
RepCount Counts the repetitions of the command
MaxRep Corresponds to "Repetitions" in the command definition
CallingSys Name of the system that originated the call.
Calling Line Index of the line interface used to originate the call
CalledNumber Telephone number dialed
CalledSys Name of the system that terminated the call.
Called Line Index of the line interface used to terminate the call
RefFile The name of the file which was sent from the terminating side to the
originating side
FileCaller The name of the file which was recorded at the originating side
(degraded signal)
FileCalled The name of the file which was recorded at the terminating side
(echo signal)
Tpdd Post dial delay in ms, including the time required to detect the ring-
back tone (app. 2..3s, country specific)
Tring Currently not used, please ignore.
Duration Total duration of the call (including dialing etc.)
TermCause Termination cause. If it is "connect", the call was successful, all
other values (busy, disconnected...) identify missed call attempts.
PsqmOMOS_W2 The MOS according to PSQM / P.861 using a silence weight of 0.2.
PsqmPlusOMOS The MOS according to PSQM+.
PsqmDelay The delay in ms as determined by OPERA™ during calculation of
PSQM.
Attenuation The attenuation of the line in dB.
EchoDelay The delay of the severest echo component in ms.
ERL The echo return loss of the severest echo component in dB,
measured with real speech.
PesqMOS The MOS according to PESQ / P.862
PesqMOSsp PESQ / P.862 MOS of the speech parts of the test signal
PesqMOSbg PESQ / P.862 MOS of the background noise parts of the test signal
DelayMin The minimum delay in ms during the call as determined by PESQ /
P.862
DelayAvg The average delay in ms during the call as determined by PESQ /
P.862
DelayMax The maximum delay in ms during the call as determined by PESQ /
P.862
LoudnessRefSone Loudness of the reference signal measured in Sone
LoudnessDegSone Loudness of the degraded signal measured in Sone
LoudnessBackSone Loudness of the background noise parts of the degraded signal
measured in Sone
LevRefTotdBov Level in dBov averaged over the total of the reference signal
LevRefSpdBov Level in dBov of the speech parts of the reference signal
12