Table of Contents
Advertisement
Quick Links
Operating Manual
Translation of the original operating manual
KBF-S ECO / KBF-S ECO-UL (E6)
Constant climate chambers with RD4 controller and Peltier technology
Model
KBF-S ECO 240
KBF-S ECO 240-UL
KBF-S ECO 400
KBF-S ECO 400-UL
KBF-S ECO 720
KBF-S ECO 720-UL
KBF-S ECO 1020
KBF-S ECO 1020-UL
BINDER GmbH
Address: Post office box 102, 78502 Tuttlingen, Germany Phone: +49 7462 2005 0
Fax: +49 7462 2005 100 Internet: http://www.binder-world.com
E-mail: info@binder-world.com Service Hotline: +49 7462 2005 555
Service Fax: +49 7462 2005 93 555 Service E-Mail: customerservice@binder-world.com
Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS: +7 495 988 15 16
Issue 07/2022
Model version
KBFSECO240-230V
KBFSECO240UL-120V
KBFSECO400-230V
KBFSECO400UL-120V
KBFSECO720-230V
KBFSECO720UL-120V
KBFSECO1020-230V
KBFSECO1020UL-120V
Art. No.
9020-0416, 9120-0416
9020-0420, 9120-0420
9020-0463, 9120-0463
9020-0464, 9120-0464
9020-0418, 9120-0418
9020-0421, 9120-0421
9020-0419, 9120-0419
9020-0422, 9120-0422
Art. No. 7001-0416
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Binder KBF-S ECO 1020
Summarization of Contents
Safety
Personnel Qualification
Qualification requirements for chamber operation and maintenance personnel.
Structure of Safety Instructions
Explains safety signal words, symbols, and message panels.
General Safety Instructions
General safety guidelines for installation and operation.
Foreseeable Misuse
Lists improper uses and their associated risks.
Measures to Prevent Accidents
Manufacturer's measures and user precautions for accident prevention.
Chamber Description
Chamber Overview
Provides a visual overview and identifies key components of the chamber.
Rear Chamber View
Details components and connections visible from the rear of the chamber.
Completeness of Delivery, Transportation, Storage, and Installation
Unpacking and Checking Equipment
Procedures for unpacking and verifying the chamber and accessories.
Guidelines for Safe Lifting and Transportation
Instructions for safely moving and transporting the chamber.
Location of Installation and Ambient Conditions
Requirements for the chamber's installation site and environmental conditions.
Installation and Connections
Mounting and Wall Distance
Instructions for installing wall spacers and tilt protection kits.
Water Supply and Quality
Details freshwater supply, quality requirements, and optional treatment.
Electrical Connection
Procedures for safely connecting the chamber to the power supply.
Functional Overview of the RD4 Chamber Controller
Menu Structure and Access Levels
Explains the controller's menu hierarchy and user access levels.
Performance During and After Power Failures
Describes chamber behavior during and after power interruptions.
Temperature and Humidity Set-Point Entry
Temperature Set-Point Entry
Guide to setting the desired temperature value via the controller.
Humidity Set-Point Entry
Guide to setting the desired humidity value via the controller.
Special Controller Functions – Turning Off Humidity System, Idle Mode
Turning Off Humidity System
How to deactivate the humidification/dehumidification system.
Idle Mode
How to activate the chamber's idle mode.
Password
Password Request
Process for entering passwords to access restricted menus.
Assign and Modify a Password
Steps to set or change User and Admin passwords.
Temperature Safety Devices
Over Temperature Protective Device (Class 1)
Description of the primary over-temperature protection system.
Overtemperature Safety Controller Class 3.1
Details on the electronic safety controller, its settings, and alarms.
General Controller Settings
Display and Language Settings
Configuring menu language, temperature unit, and display brightness.
Date and Time Settings
Procedures for setting the current date and time on the controller.
Network Configuration
Setting the chamber's address for network communication.
Tolerance Range Settings
Setting the Delay Time for Tolerance Range Alarm
Setting the delay before tolerance alarms are triggered.
Setting the Temperature Tolerance Range
Defining acceptable temperature deviation limits.
Setting the Humidity Tolerance Range
Defining acceptable humidity deviation limits.
Notification and Alarm Functions
Information Messages
Displays and explanations of informational messages from the controller.
Alarm Messages
Lists and explains various alarm conditions and messages.
Activating / Deactivating Audible Alarm
How to turn the audible alarm on or off.
Program Start / Stop Function
Start Time Program
How to start a programmed time sequence.
Start Week Program
How to start a programmed week sequence.
Stop Program
How to stop an active program.
Ethernet Network Settings
Viewing Network Settings
How to access and view MAC, IP, subnet, gateway, and DNS details.
Configuring Network Settings
Procedures for setting IP, DNS, subnet, and gateway manually or automatically.
Data Recorder
Recorded Data
Details the types of data recorded by the chamber.
Setting the Storage Rate for DL1 Data
How to configure the data logging interval.
USB Menu: Data Transfer
USB Stick Connection and Preparation
How to connect and prepare a USB stick for use.
Import and Export Functions
Procedures for importing configuration and exporting data.
Data Transfer Process and Errors
Information on transfer progress, errors, and removing the USB stick.
Self-Test Function
Activating the Self-Test Function
Steps to initiate the chamber's self-test routine.
Deactivating the Self-Test Mode
How to stop or reset the self-test function.
Humidification / Dehumidification System
Function of the Humidifying and Dehumidifying System
Explanation of how the humidity system operates and its requirements.
Defrosting at Refrigerating Operation
Manual Defrosting Procedure
Steps for manually defrosting the chamber at low temperatures.
Options
APT-COM™ 4 Multi Management Software
Overview of the optional software for chamber control.
Cleaning and Decontamination
Cleaning
Procedures and recommended agents for cleaning the chamber.
Decontamination / Chemical Disinfection
Steps for decontaminating the chamber after hazardous substance exposure.
Maintenance, Troubleshooting, and Service
Maintenance and Service Procedures
Guidelines for maintenance intervals, personnel, and reminders.
Simple Troubleshooting
Basic fault diagnosis and resolution steps for common issues.
Returning Equipment for Service
Process for sending chambers back to BINDER GmbH for repair.
Disposal
Transport Packing Disposal
Guidelines for recycling or disposing of packaging materials.
Chamber Decommissioning
Procedures for safely shutting down and preparing the chamber for disposal.
EU Region Disposal
Regulations for disposing of the chamber within Germany and other EU countries.
Disposal Outside the EU
Guidance for environmentally friendly disposal in non-EU states.
Technical Description
General Technical Specifications
Information on calibration, over-current protection, and usable volume.
Technical Data
Comprehensive table of technical specifications for chamber models.
Equipment, Options, and Spare Parts
Lists standard equipment, optional accessories, and spare parts.
Dimensions
Detailed physical dimensions and drawings for chamber models.
Certificates and Declarations of Conformity
EU Declaration of Conformity
Document confirming compliance with EU directives.
UKCA Declaration of Conformity
Document confirming compliance with UK regulations.
Certificate for the GS Mark of Conformity
Certificate for the German GS safety mark.
Contamination Clearance Certificate
For Chambers Outside USA and Canada
Form for declaring the chamber is free of hazardous contamination.
For Chambers in USA and Canada
Return authorization request form for USA/Canada.
Need help?
Do you have a question about the KBF-S ECO 1020 and is the answer not in the manual?
Questions and answers