Advertisement
T E C H N I C A L
S P E C I F I C A T I O N
A N A L Y Z E R
In-band Signaling
E1/T1 Interface Trunk:
Supported PSTN Protocols:
Packet interface:
Ethernet:
Control Processor:
Core DSP:
Maximum Power:
Physical:
System Hardware Description
OPERA Portable PC System
DC Power Supply:
Wattage:
Voltage:
Backup Power Supply:
Backup battery:
Temperature:
Operating:
Storage:
Relative humidity:
Regulatory:
This device complies with part 15 of the FCC Rules.
F O R
T H E
O P E R A ™
DTMF (TIA 464B),
MF R1/R2, MFC, AC15, SS-4, SS-5,
Call progress tones generation and detection
RJ-48 Connector, 120 Ohm
European ISDN PRI, North American ISDN,
E1 CAS/MFR2 Protocols, T1 CAS/Robbed Bit
Protocols.
On-board NIC or PCI; Selectable per port
10/100 Base-T, RJ-45 (used by card for RTP/RTCP)
Motorola PowerQUICC MPC860
AudioCodes AC48105A-C VoIP DSP
3.0 A @ 5V without E1/T1,
3.6 A with E1/T1
Full length, 32-bit PCI card, Rev 2.1, slave, 33 MHz
400 W
90 to 135 V at 60 Hz;
180 to 265 V at 50 Hz
Autoranging 90 to 265 V
3-V CR2032 coin cell
10° to 35°C°* (50° to 95°F)
-40° to 65°C (-40° to 149°F)
20% to 80% (noncondensing)
12
O B J E C T I V E
P E R C E P T U A L
Advertisement
