Advertisement
T E C H N I C A L
S P E C I F I C A T I O N
A N A L Y Z E R
Sound file formats:
Max. duration of measurement signals:
Gain Compensation:
Automatic Delay Compensation:
Static Delay:
Delay Tracking:
Automated operation:
Available Measurement Results:
BS.1387 intermediate results (MOVs): Average Bandwidth of the Reference Signal (AvgBwRef),
F O R
T H E
O P E R A ™
WAVE-files containing A-law, mu-law, linear PCM (8 or 16
bit)
File-based:
32
2
On-line:
(
fs
(e.g. ~12.4 hours at 48 kHz, 16 bit resolution)
Maximum gain difference = ±60 dB
±1000 ms (File-based measurements),
±500 ms (On-line measurements)
Automatic Delay Compensation ±10 s
±512 samples
Supported
Timesignal,
Spectrum,
Excitation,
Noise-to-Mask Ratio (NMR), averaged,
Noise-to-Mask Ratio (NMR) vs. Time,
Masked Threshold,
Loudness,
Objective Difference Grade (ODG), averaged (Advanced
and Basic Version),
Objective Difference Grade (ODG) vs. Time,
Distortion Index (DI), for the Advanced and the Basic
Version,
Delay between the Reference Signal and the output signal
of the device under test,
Attenuation of the test signal compared to the reference
signal,
Modulation of the reference and test signal
Average Bandwidth of the output signal of the device under
test (AvgBwTst),
Total Noise-to-Mask Ratio (NMRtotB),
Relative fraction of frames for which at last one frequency
band contains a significant noise component (RDF),
Average Distorted Block (=Frame), taken as the logarithm
of the ratio of the total distortion to the total number of
severely distorted frames (ADB),
Maximum of the Probability of Detection after low pass
filtering (MFPD),
Harmonic structure of the error over time (EHS),
Windowed averaged difference in modulation (envelopes)
between Reference Signal and Signal Under Test
(WinModDif1B),
Averaged modulation difference (AModDif1B),
8
O B J E C T I V E
P E R C E P T U A L
As defined by WAVE-format
(
bitspersam
ple
) 8
Advertisement
