Table of Contents
Advertisement
TXG / YCT / RXT Rotary Tillers
PTO SHAFTS:
TXG – All sizes
YCT- 60-66-74
YCT-082 (EARLY)
YCT-082 (LATE)
RXT – All Sizes
Operator's Manual
Parts Breakdown
Series 40 (slip Clutch 150mm)
Series 40 (slip Clutch 180mm)
Series 60 (slip Clutch 180mm)
Series 40 (slip Clutch 180MM)
Series 60 (slip Clutch 200mm)
Publication #: June 2013
Advertisement
Table of Contents
Related Manuals for Tar River RXT
Summarization of Contents
Introduction and Safety
Safety Alert Symbol
Explains the meaning and importance of the safety alert symbol used throughout the manual.
Safety Signal Words and Guidelines
Danger Signal Word
Indicates an imminently hazardous situation resulting in death or serious injury.
Warning Signal Word
Indicates a potentially hazardous situation resulting in death or serious injury.
Caution Signal Word
Indicates a potentially hazardous situation resulting in minor or moderate injury.
Operator Responsibility
Emphasizes operator's role in safe operation, reading manuals, and following precautions.
Safety Decal Replacement
Instructions for replacing missing or illegible safety decals on the equipment.
Safe Operation Practices
Guidelines on avoiding alcohol/drugs, training, ROPS, and respecting machine limits.
Pre-Operation Safety Checks
Safety Decal Care
Instructions for cleaning the area and applying safety decals correctly.
Manual Study
Emphasizes the importance of carefully studying and understanding the manual.
Personal Protective Equipment
Recommends wearing protective clothing and substantial shoes, avoiding loose items.
Equipment Inspection
Details visual inspection for loose bolts, worn parts, and ensuring proper tire inflation.
During Operation Procedures
Children and Bystanders
Prohibits children on the product and requires clearing the area of bystanders.
Towing Unit Attachment
Instructions for securely attaching the feeder to a towing unit using pins and safety chains.
Operation on Slopes
Advises using lower gears on downgrades and slowing down for turns and rough terrain.
Highway Transport Compliance
Stresses compliance with local regulations for transporting equipment on public roads.
Awareness of Surroundings
Warns operators to be aware of bystanders, especially children, and noise levels.
Passengers and Moving Parts
Prohibits passengers and keeping clear of moving parts during operation.
Halting Operation
Procedures for safely halting operation, including setting brakes and shutting off the engine.
Highway and Transport Operations
Safe Driving Practices
Key practices include latching brake pedals, safe speed, and reducing speed for turns.
Braking Procedures
Emphasizes never using independent braking and always keeping the vehicle in gear downhill.
Highway Safety Regulations
Advises complying with laws for highway safety and using warning devices.
Lighting and Signage
Details the use of flashing amber lights and SMV emblems for visibility.
Route Planning and Courtesy
Recommends planning routes to avoid traffic and yielding to oncoming vehicles.
Bridge Load Ratings
Advises checking bridge load ratings to avoid crossing overweight bridges.
Operation and Adjustments
Pre-Operation Checks
Instructions for checking oil and grease points before starting operation.
Attaching to the Tractor
Step-by-step guide for connecting the rotary tiller to a tractor's hitch and PTO.
Shortening a PTO Driveline
Explains how to measure and shorten the PTO driveline to ensure proper overlap.
Slip Clutch Adjustments
Procedure for adjusting the slip clutch, including scribing marks and tightening nuts.
Working Depth Adjustment
Describes how to adjust the working depth by raising or lowering the side skids.
Tailgate Adjustment
Explains how to adjust the tailgate for smoothing and compacting tilled ground.
Start Up Procedure
Steps for starting the tiller after making necessary adjustments.
Removal and Storage
Steps for removing the tiller from the tractor and preparing it for storage.
Post-Operation and Maintenance
Post-Operation Procedures
Steps to take after finishing operation, including shutting down and removing keys.
Storage Guidelines
Recommendations for storing the unit safely and away from hazards.
Performing Maintenance
General principles and schedule for maintaining the rotary tiller.
Maintenance Schedule
Outlines maintenance tasks required at 8, 16, and 200-hour intervals.
Replacing Blades
Instructions on correctly replacing tiller blades to maintain the rotor's scroll pattern.
PTO Shaft Assembly
PTO Shaft Components
Lists and describes the various parts that make up the PTO shaft assembly.
Limited Warranty Information
Warranty Coverage Details
Details the warranty period for new machinery and extended gearbox warranty.
Warranty Exclusions
Lists items and conditions not covered by the limited warranty.
Warranty Termination Conditions
Conditions under which the limited warranty obligations will be terminated.
Disclaimer of Implied Warranties
Disclaimer regarding implied warranties and consequential damages.
Need help?
Do you have a question about the RXT and is the answer not in the manual?
Questions and answers