OPTICOM MIL-STD-810F Manual page 7

As the vibration shaker was designed to translate in the vertical direction only, a set of
Aluminum mounting fixtures were used to position the CCTV camera in its two mutually
perpendicular axes (Vertical and Transverse) as shown in Figures 4A and 4B.
Figure 4A: Vertical orientation mounting of the CCTV camera.
Figure 4B: Transverse orientation mounting of the CCTV camera.
Weir-Jones Engineering Consultants Ltd.
Feedback accelerometers
4
30144-REP-001-0.wp9