Advertisement
MG6100 series
Service Manual
(MG6110 / MG6120 / MG6130 / MG6140 / MG6150 / MG6170 /
MG6180)
Revision 0
QY8-13DA-000
COPYRIGHT©2010 CANON INC. CANON MG6100 series 082010 XX 0.00-0
Scope
This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for
qualified persons to learn technical theory, installation, maintenance, and repair of products. The manual covers information
applicable in all regions where the product is sold. For this reason, it may contain information that is not applicable to your
region.
This manual does not provide sufficient information for disassembly and reassembly procedures.
Refer to the graphics in the separate Parts Catalog.
Revision
This manual could include technical inaccuracies or typographical errors due to improvements or changes made to the product.
When changes are made to the contents of the manual, Canon will release technical information when necessary. When
substantial changes are made to the contents of the manual, Canon will issue a revised edition.
The following do not apply if they do not conform to the laws and regulations of the region where the manual or product is used:
Trademarks
Product and brand names appearing in this manual are registered trademarks or trademarks of the respective holders.
Copyright
All rights reserved. No parts of this manual may be reproduced in any form or by any means or translated into another language
without the written permission of Canon Inc., except in the case of internal business use.
Copyright © 2010 by Canon Inc.
CANON INC.
Inkjet Device Market Support Management Div.
451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan
Advertisement
Related Manuals for Canon MG6130
Summarization of Contents
INTRODUCTION
How to Use This Service Manual
Guide on navigating the manual for effective troubleshooting and repair.
TROUBLESHOOTING
Troubleshooting by Symptom
Step-by-step solutions for common printer malfunctions categorized by observable symptoms.
Operator Call Error Troubleshooting
Addresses errors indicated by the Alarm LED and LCD messages on the printer.
Service Call Error Troubleshooting
Guides on resolving errors indicated by cyclic blinking of Alarm and Power LEDs.
REPAIR
Major Replacement Parts and Adjustment
Lists key components for replacement and necessary adjustments post-repair.
Part Replacement Procedures
Detailed steps for removing and replacing various machine parts.
External Housing, Scanner Unit, and Document Cover Removal
Procedures for removing the outer casing and scanner assembly.
Operation Panel Removal
Steps for safely removing the printer's control panel assembly.
Document Window R Removal
Instructions for removing the document window component.
Carriage Unlocking
Procedure to unlock the print carriage for maintenance.
ASF Unit Removal
Steps for removing the Automatic Sheet Feeder (ASF) unit.
Carriage Unit Removal
Detailed steps to remove the print carriage assembly.
Spur Unit and Platen Unit Removal
Instructions for removing the spur and platen units.
Purge Drive System Unit and Switch System Unit Removal
Steps to remove the purge drive and switch system units.
Engine Unit Reassembly
Guidance on reassembling the printer's engine components.
Cable Wiring and Connection
Procedures for correctly connecting internal cables and harnesses.
Ink Absorber Replacement
Steps for replacing the ink absorber unit.
ADJUSTMENT / SETTINGS
Adjustment
Details various adjustments like EEPROM initialization, alignment, and sensor settings.
Adjustment and Maintenance in User Mode
User-accessible adjustments and maintenance tasks via the control panel.
Adjustment and Settings in Service Mode
Procedures for accessing and utilizing the service mode for advanced adjustments.
Service Tool Functions
Overview and functionality of the Canon Service Tool software.
LF / Eject Correction
Procedure to correct paper feed and eject issues for optimal print quality.
Button and LCD Test
Testing the functionality of the printer's buttons and LCD display.
Ink Absorber Counter Setting
How to set the ink absorber counter after replacement.
Disc Label Print Position Correction
Adjusting the print position for disc labels.
Capacitive Sensor Sensitivity Setting
Adjusting the sensitivity of the operation panel's capacitive sensors.
Grease Application
Specific instructions and locations for applying grease to printer parts.
Special Notes on Servicing
Important considerations and special procedures for servicing the printer.
VERIFICATION AFTER REPAIR
Standard Inspection Flow
A general checklist for verifying post-repair functionality.
Integrated Inspection Pattern Print
Printing and analyzing an integrated pattern for quality checks.
Ink Absorber Counter Value Print
Printing the ink absorber counter value for verification.
APPENDIX
Customer Maintenance
Maintenance tasks that can be performed by the customer.
Special Tools
List of specialized tools required for service.
Sensors
Details of various sensors, their functions, and detectable problems.
Need help?
Do you have a question about the MG6130 and is the answer not in the manual?
Questions and answers