Advertisement
Important Stitch Creator
information
Stitch Creator can be used in either sewing
mode or embroidery mode. A stitch created
when embroidery mode is active will become an
embroidery design when saved, and cannot be
sewn as a stitch in sewing mode.
To save a stitch
If sewing mode is active, you can save your stitch
both in personal menu (A) and personal fi les (B).
If embroidery mode is active, your stitch will be
loaded to embroidery edit, and can only be saved
as a design (C). A stitch created in sewing mode
can be loaded manually into embroidery edit.
To re-load a stitch
If sewing mode is active when closing Stitch
Creator, your stitch will be loaded to sewing
mode and is ready to be sewn. If selecting another
stitch in sewing mode and then re-opening Stitch
Creator, your stitch will remain unchanged. Every
time Stitch Creator is closed, the stitch will be
Common Stitch Creator
pop-ups
Not an editable stitch
Some stitches are not possible to insert in a
sequence, for example buttonholes and four
direction stitches.
Sequence out of range
Your programmed stitch can be up to
approximately 500mm (20") long. If the sequence
exceeds the maximum length this pop-up will let
you know.
The stitch or stitch point you are trying to add will
make the sequence too long.
6:6
A
B
loaded to sewing mode.
If embroidery mode is active, your stitch will
be loaded to embroidery edit as a design. If a
sequence or stitch is selected and you re-open
Stitch Creator from embroidery mode, the stitch
will remain unchanged. If no stitch is selected,
Stitch Creator will be empty, ready to create
something new. Every time Stitch Creator is closed,
the stitch will be loaded to embroidery edit.
To use Stitch Creator in either sewing mode or
embroidery mode
A stitch created when sewing mode is active will
not be available when opening Stitch Creator after
activating embroidery mode and vice versa. The
created stitch will not be transferred to the other
mode.
C
Advertisement
