Related Manuals for LABORIE Aquarius CT
Summarization of Contents
1 INTRODUCTION
1.1 Manual Notes
Notes regarding previous versions of the Aquarius system.
2 TECHNICAL SPECIFICATIONS
2.1 Equipment Specifications
Detailed specifications for various AQUARIUS system models, including dimensions and electrical requirements.
2.3 Equipment Setup
Step-by-step instructions for setting up the AQUARIUS system components and accessories.
2.9 Consumables and Transducer Setup
Procedures for connecting and preparing consumables and transducers for testing.
3 EQUIPMENT STATUS AND LIGHT SIGNALS
3.1 Pump Hub and Roam™ DX Status
Explanation of status indicators for Pump Hub and Roam™ DX devices.
3.3 Urocap™ V and UPP Status
Details on status indicators for Urocap™ V and UPP for monitoring device operation.
4 CALIBRATION
4.1 Calibrating Flow and Volume
Procedures for calibrating flow and volume measurements using Urocap™ V and Spinning Disk transducers.
4.2 Calibrating Pressure and EMG
Steps for calibrating pressure and EMG channels using the Roam™ DX device.
4.3 Calibrating the Pump
Instructions for performing pump calibration using different pump sets and configurations.
4.5 Calibrating the UPP Puller
Procedure for calibrating the UPP Puller for accurate positional movement.
5 CLEANING AND PREVENTIVE MAINTENANCE
5.1 General Cleaning and Maintenance
Guidelines for general cleaning and preventive maintenance of the AQUARIUS system and its components.
5.7 Battery Charging and Maintenance
Procedures for charging and performing preventive maintenance on device batteries.
5.11 Checking Calibration
Procedures for checking the calibration of Uroflowmeter, pump, EMG, and transducers.
6 TROUBLESHOOT AND SERVICE
General Device and Component Troubleshooting
Solutions for common issues with devices, EMG, pressures, and pumps.
System Operation and Connectivity Troubleshooting
Troubleshooting steps for system operation, component function, and connectivity issues.
Software and Interface Troubleshooting
Resolving software errors and issues related to PC, printer, and touchscreen interfaces.
7 ELECTROMAGNETIC COMPATIBILITY (EMC)
EMC Requirements and Tests
Overview of compliance with electromagnetic compatibility standards and testing procedures.
Electromagnetic Immunity Standards
Details on immunity test levels and compliance criteria according to IEC standards.
8 SYMBOLS
Symbols Glossary
Explanation and definition of symbols used throughout the service manual and on device labels.
Need help?
Do you have a question about the Aquarius CT and is the answer not in the manual?
Questions and answers