Related Manuals for Arlyn Scales 320M
Summarization of Contents
YOUR NEW SCALE
Scale Version
Information about the scale's firmware version compatibility and manual applicability.
Features
Lists the key features and capabilities of the digital scale, such as display, calibration, and connectivity.
Precautions
Important safety warnings and handling guidelines for the scale to prevent damage or injury.
Initial Set-Up and Operation
Steps for unpacking, setting up, and operating the scale for the first time, including leveling and warm-up.
CONTROLS AND INDICATORS
Main Display Screen
Describes the LCD graphics display and information shown on different screens for weight and count.
Front Panel / Keyboard
Details the layout and function of the twelve-button control panel, including key types and their uses.
SYSTEM OPERATION
Basic Menu Operation
Explains how to navigate the scale's menu-driven interface using different menu types and selection methods.
Tares
How to use the tare function to remove weight from the display for filling processes and achieve net weight.
System
System menu for checking and configuring scale settings like backup, restore, and various operational parameters.
CONFIGURATION AND CALIBRATION
Platform Advanced Setup
Detailed configuration options for scale platforms, including resolution, zeroing, filtering, and stability control.
Span Calibration
Procedure to adjust scale sensitivity using a known weight for accurate readings and proper performance.
CALIBRATION AND TROUBLESHOOTING
Scale reading is fluctuating wildly.
Identifies causes and solutions for unstable or wildly fluctuating scale readings, such as environment or power issues.
Span Calibration
Detailed procedure for performing a full span calibration with a known weight to ensure accuracy.
Platform Connector Pinout
Diagram and description of the platform connector cable wiring for troubleshooting connection issues.
RS232 COMMUNICATIONS PORT
Configuring the Port
Settings for baud rate, data bits, parity, and echo for RS232 communication setup.
Print Frame (For RS232/USB/ETHERNET)
Defines the data format for print output, allowing customization of transmitted data fields.
External Command Interface
Using external commands to control the scale remotely, including keyboard emulation and command parameters.
ANALOG OUTPUT
Analog Setup Menu
Configuration parameters for analog output, including activation, current settings, and negative reading handling.
Special Note for Multiple Platform Scales
Notes specific to analog output with multiple platforms, covering single and multi-channel configurations.
SETPOINT CONTROLLER
Output Specifications and Notes
Details on setpoint controller outputs, current sourcing/sinking, and wiring considerations for external devices.
Creating Setpoints Formulas
Guide to defining setpoint formulas for controlling outputs based on weight conditions and process automation.
WEIGHT AVERAGING
Configuring the Weight Average Option
Parameters for activating, setting type (push button/continuous), and time for weight averaging.
BATTERY PACK OPERATION
Auto Shutoff Setup
Configuring automatic scale shutdown to conserve battery power during inactivity periods.
USB COMMUNICATION
Configuring the Port
Enabling or disabling the USB communication port for data transfer and PC connectivity.
PC Driver Installation and Testing
Information on installing necessary USB drivers for PC connectivity and testing the interface.
DATALOGGING (USB Memory Stick)
Basic Operation
How to activate and use the USB data logger to record weight entries to a flash drive.
USB Flash Drive Use
Guidelines for using the USB flash drive, including file creation, management, and advanced operations.
KEYBOARD WEDGE
Operation
How to use the scale as a keyboard wedge via USB, sending data directly to PC applications.
Need help?
Do you have a question about the 320M and is the answer not in the manual?
Questions and answers