Table of Contents
Advertisement
Quick Links
Interface module
IM151-3 PN HIGH FEATURE (6ES7151-
3BA23-
0AB0)
SIMATIC
ET 200S distributed I/O
Interface module
IM151-3 PN HIGH FEATURE
(6ES7151-3BA23-0AB0)
Manual
08/2010
A5E01584258-04
___________________
Preface
___________________
Properties
___________________
Parameters
___________________
Functions
Interrupt, error, and system
___________________
messages
___________________
Response times
1
2
3
4
5
Advertisement
Table of Contents
Related Manuals for Siemens 6ES7151-3BA23-0AB
Summarization of Contents
Preface
Purpose of the Manual
Supplements the ET 200S Distributed I/O System Operating Instructions.
Properties
IM 151-3 PN HIGH FEATURE Module Features
Details the features of the IM151-3 PN HIGH FEATURE interface module, including its interconnection and capabilities.
SNMP Support and Configuration
Explains the support for the SNMP Ethernet service, including MIB-2 (RFC1213) and R/W objects.
SIMATIC Micro Memory Card Usage
Describes the use of a SIMATIC Micro Memory Card for device naming and firmware updates.
Firmware Update Procedures
Details the methods for updating the firmware of the IM151-3 PN HIGH FEATURE module via MMC or PROFINET IO.
Parameters
IM151-3 HIGH FEATURE Module Parameters
Lists and describes parameters like Bus length, Interference frequency suppression, and Option handling.
Functions
PROFINET IO Identification Data
Explains identification data stored in a module for system configuration, hardware identification, and troubleshooting.
Configuring PROFINET IO Ports
Details how to configure ports X1P1 and X1P2 in HW Config, including addresses and topology settings.
Option Handling Mechanism
Describes the procedure for operating distributed stations with different configurations using a single configuration.
PROFlenergy Energy Saving Function
Explains PROFlenergy for energy saving by switching off encoder and load supply using special commands.
Interrupt, Error, and System Messages
Diagnostics using LED Display
Provides an overview of the LED indicators on the IM151-3 interface module for status and error indication.
Substitute Value Behavior
Explains slot-granular substitute value behavior triggered by events like stop controller or FW update.
Diagnostics Readout and Channel Analysis
Details methods for reading diagnostics data and explains channel diagnostics for module errors.
Maintenance Alarms
Describes maintenance interrupts and system alarms generated in STEP 7.
Evaluating ET 200S Interrupts
Explains how the I/O device generates and how interrupts are evaluated based on the I/O controller.
Response Times
PROFINET IO Response Times
Provides a formula for calculating ET 200S response time and lists factors influencing it.
Digital Input Module Response Time
Explains that reaction times of digital input modules depend on the input delay.
Digital Output Module Response Time
States that response times for digital output modules correspond to the output delay.
Analog Input Module Response Time
Describes conversion time and cycle time for analog input modules.
Analog Output Module Reaction Times
Details conversion time, cycle time, and settling time for analog output modules.
4 IQ-SENSE Module Response Times
Specifies the response time of the 4 IQ-SENSE module as a cycle time.
Technology Module Response Times
States that response times for technology modules are specified as response time or update rate.
Need help?
Do you have a question about the 6ES7151-3BA23-0AB and is the answer not in the manual?
Questions and answers