Dram Frequency; Dram Timing Configuration - Biostar TPOWER I55 Setup Manual

Motherboard Manual

DRAM Frequency

To get better system performance, sometimes downgrading the memory
frequency is necessary when CPU frequency is adjusted over the upper
limit.

DRAM Timing Configuration

Enter this item for more advanced DRAM timing settings.
Clock Gen Configuration
Enter this item for more advanced Clock Gen settings.
Voltage Control
Enter this item for more advanced voltage settings.
Intel PPM Configuration
Enter this item for more advanced Intel PPM settings.
BIOSTAR Me mory Insight
Enter this item for more advanced memory SPD information.
G.P.U Phase Control
Enter this function for more power saving settings.
NOTE
Overclock is an optional process, but not a "must-do" process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single step.
Main Advanced
Over-Clocking Navigator Setting
WARNING:Please Clear CMOS if system no display
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Current CPU Frequency
Current Memory Frequency
Over Clock Retry Count
Intel(R) SpeedStep(tm) tech
CPU Ratio Setting
CPU Frequency Setting
DRAM Frequency
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Control
> Intel PPM Configuration
26
BIOS SETUP UTILITY
PCIPnP Boot
after overclocking
[Normal]
[V6-Tech Engine]
Options
:
Normal
:
Automate OverClock
[1]
Manual OverClock
[Enabled]
[ x21.0]
[133]
[Auto]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Chipset O.N.E Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Go to Sub Screen
Enter
F1 General Help
F10 Save and Exit
Exit
ESC