Table of Contents
Advertisement
TPower N750 BIOS Manual
Channel Interleaving
T his item allows you to control the DDR2 dual-channel function.
Options:
XOR of Address bit[20:16.6] (Default) / Address bits 6 / Address bits 12 /
XOR of Address bit[20:16.9]
Enable Clock to All DIMMs
T his item determines
(Electromagn etic Interference) and reduce power consumption by turning off
unoccupied or inactive DIMM slots.
Options:
Disabled (Default) / Enabled
MemClk Tristate C3/ATLVID
T his item enables or disables the MemClk T ristate function in C3 Mode.
Options:
Disabled (Default) / Enabled
Memory Hole Remapping
T his item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options:
Enabled (Default) / Disabled
DCT Unganged Mode
T his item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2)
dual-chann el operation mode.
installed, using unganged mode can still make it run in dual-channel operation.
Options:
Always (Default) / Auto
Power Down Enable
T his item controls the DRAM power down function.
Options:
Enabled (Default) / Disabled
Power Down Mode
T his item allows you to select the DRAM power down mode.
Options:
Channel (Default) / Chip Select
DRAM Timing Mode
T his item allows you to choose to manually or automatically regul ate the DRAM
T iming.
Options:
Auto (Default) / DCT0 / DCT1(for AM2+ CPU) / Both(f or AM2+ CPU)
whether
the BIOS should actively reduce
If two DRAM modules with different size are
31
EMI
Advertisement
Table of Contents
