Biostar MCP6P3 - BIOS Manual page 15

MCP6P3/N68S3 BIOS Manual
ACPI APIC support
T his item is used to enable or disable the motherboard's APIC (Advan ced
Programmable Interrupt Controller). T he APIC provides multiprocessor support,
more IRQs and faster interrupt handling.
Options: Enabled (Default) / Disabled
AMI OEMB table
Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root
System Description T able (RSD T ) table.
Options: Enabled (Default) / Disabled
Headless mode
T his is a server-speci f ic feature. A headless server is one that operates without a
keyboard, monitor or mouse. To run in headless mode, both BIOS and operating
system (e.g. Windows Server 2003) must support headless operation.
Options: Disabled (Default) / Enabled
MCP61 ACPI HPET TABLE
T his item allows you to enable or disable MCP61 ACPI HPET T ABLE.
Options: Enabled (Default) / Disabled
Power Management/APM
T his item allows you to activate Power Management.
Options: Enabled (Default) / Disabled
Power Button Mode
T his item allows you to choose the mode when Power Button is pressed.
Options: On/O ff (Default) / Suspend
Resume On PCI PME#
When you select Enabled, a PME signal f rom PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options: Disabled (Default) / Enabled
14