Table of Contents
Advertisement
Quick Links
WARNING
Improper installation, adjustment, alteration, service,
or maintenance can cause property damage, injury,
or death. Read the installation, operation, and service
instructions thoroughly before installing or servicing
this heater.
OWNER
Retain this Manual & ensure available for service.
Improper installation, adjustment, alteration, service,
or maintenance can cause injury, death, or property
damage.
Read the installation, operation, and service
instructions thoroughly before installing or servicing
this heater.
Series S
Installation, Operation and Service Instructions
INFRARED HEATER
563 Barton Street, Stoney Creek, Ontario L8E 5S1, CANADA
www.superiorradiant.com
Page 1
FOR YOUR SAFETY
Do not store or use flammable vapors and liquids in the
vicinity of this or any other heater.
If you smell gas:
1. Open windows
2. Don't touch electrical switches
3. Extinguish any open flame
4. Immediately call your gas supplier
INSTALLER
Provide Manual to Owner upon completion of
installation!
Read and thoroughly understand these Instructions
before attempting any installation
SERIES S
LT017 May 14, 2019
Advertisement
Table of Contents
Related Manuals for SRP S9
Summarization of Contents
Introduction to Superior Radiant Products
Codes and Regulations for Heater Installation
Ensures compliance with national and local building codes for gas-fired and suspended heaters.
General Gas and Electrical Codes
Adherence to National Fuel Gas Code, NFPA 54, CSA B149.1/B149.2, NEC/CEC is mandatory.
Specific Installation Codes: Aircraft Hangars
Installation in aircraft hangars must follow ANSI/NFPA 409 and CSA B149.1/B149.2 standards.
Specific Installation Codes: Public Garages
Public garage installations must comply with NFPA 88A/88B and CSA B149.1/B149.2 codes.
General Specifications for Series S Heaters
Gas Supply Specifications
Details supply and manifold pressures for Natural Gas and Propane, plus inlet connection type.
Electric Supply Options
Lists the two available electric supply options: 24Vac and Millivolt pilot system.
Heater Configuration and Ratings
Sea Level Performance Ratings
Table of nominal input (BTU/hr) for Series S models at sea level for Natural Gas and Propane.
High Altitude Performance Adjustments
Describes de-rating for altitudes above 2000 ft (US) and 4500 ft (Canada).
Layout Recommendations for Heater Placement
General Layout Considerations
Factors like ventilation, codes, and environment are key for heater placement.
Spot Heating Application Guidance
Key considerations for maximizing radiant heat effectiveness in spot heating scenarios.
Installation Procedures
Heater Mounting Methods
Details mounting configurations, angles, and hardware like S hooks and chain.
Gas Supply Connection and Testing
Outlines requirements for connecting, testing, and purging the gas supply to the heater.
Electric Supply and Wiring
Covers electrical connections, grounding, and typical wiring layouts for heaters.
Operation and Maintenance Instructions
Heater Startup and Operation
Step-by-step guides for Direct Spark Ignition and Millivolt Pilot System startup.
Heater Shutdown Procedure
Instructions for safely shutting down the heater, including gas control and power.
Annual Maintenance Tasks
Key maintenance steps including gas valve closure, dust removal, and wiring checks.
Need help?
Do you have a question about the S9 and is the answer not in the manual?
Questions and answers