Related Manuals for Seagate IronWolf Pro ST2000NE001
Summarization of Contents
Introduction
About the Serial ATA interface
Explains the advantages and transition from parallel ATA to Serial ATA interfaces.
Drive specifications
Specification summary tables
Provides a quick reference table for various drive specifications.
Formatted capacity
Details the formatted capacity and guaranteed sectors for each drive model.
Recording and interface technology
Outlines the recording method and Serial ATA interface specifications.
Start/stop times
Specifies the time taken for power-on to ready and standby to ready transitions.
Power specifications
Details the DC power requirements and consumption for different operating modes.
Conducted noise
Specifies the acceptable limits for input noise ripple on power supply lines.
Voltage tolerance
Defines the acceptable voltage variations for the drive's power inputs.
Extended Power Conditions - PowerChoice™
Explains the PowerChoice interface for tailoring power management.
Environmental limits
Details operating and non-operating temperature ranges and gradients.
Effective Altitude (sea level)
Specifies the operating and non-operating altitude limits for the drive.
Shock and Vibration
Defines shock resistance specifications for operating and non-operating conditions.
Vibration
Specifies vibration tolerance for operating and non-operating states.
Acoustics
Details sound power levels measured during idle and performance seek.
Test for Prominent Discrete Tones (PDTs)
Describes the methodology for measuring and identifying prominent discrete tones.
Electromagnetic immunity
Details the drive's performance under various radio frequency environments.
Reliability
Provides MTBF and AFR specifications under specified field conditions.
Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
Provides Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) specifications.
HDD and SSD Regulatory Compliance and Safety
Lists safety certifications, regulatory models, and corrosive environment considerations.
Safety certification
Lists the safety certifications recognized for the drives.
Regulatory Models
Identifies the regulatory model numbers for the drive series.
Corrosive environment
Discusses sensitivity to corrosive environments and recommendations for data centers.
Reference documents
Lists supported standards and ANSI documents referenced in the manual.
Product warranty
Explains warranty terms, how to check remaining warranty, and shipping/storage.
Configuring and mounting the drive
Handling and static-discharge precautions
Provides essential guidelines for safe handling and preventing ESD damage.
Configuring the drive
Explains the point-to-point connection and master/slave relationship in SATA.
Serial ATA cables and connectors
Details the SATA interface cable, connectors, and hot-plug capabilities.
Drive mounting
Covers drive mounting orientations and screw specifications.
Mechanical specifications
Provides detailed mechanical dimensions and weight for drive models.
Serial ATA (SATA) interface
Hot-Plug compatibility
Describes the drive's ability to be connected/disconnected while the system is running.
Serial ATA device plug connector pin definitions
Lists the pin assignments for SATA connectors and their functions.
Supported ATA commands
Identify Device command
Details the Identify Device command and its returned data structure.
Set Features command
Explains how to control drive features like write cache and transfer modes.
S.M.A.R.T. commands
Covers S.M.A.R.T. commands for drive health monitoring and failure prediction.
Need help?
Do you have a question about the IronWolf Pro ST2000NE001 and is the answer not in the manual?
Questions and answers