Advertisement
Quick Links
Advertisement
Related Manuals for Onyx LZR 500W
Summarization of Contents
INSTALL THE HANDLEBAR
Remove Handlebar Stem Screws
Instructions for removing the four screws from the handlebar stem using the Y-Wrench Allen Key Tool.
Secure Handlebar to Stem
Align, center, and tighten handlebar screws in a crisscross pattern to prevent twisting.
INSTALL THE FRONT WHEEL
Prepare Wheel and Fork
Remove front caliper brake pad spacer and wheel axle before aligning hub to fork.
Install and Tighten Wheel Axle
Install axle through fork and hub, tighten, and adjust lever angle for secure fit.
ATTACH THE PEDALS
Install Pedals by Hand
Screw left (reverse threaded) and right pedals into crank arms, noting 'L' and 'R' markings.
Final Pedal Tightening
Use the 15mm wrench to securely tighten both pedals for optimal performance.
ADJUST THE SEAT HEIGHT
Adjust Seatpost Position
Open seat clamp lever, adjust seatpost to a comfortable height, then close lever securely.
POWER ON/OFF Controls
Powering On the Bike
Long press power button to turn on; indicators show pedal assist mode and battery level.
Powering Off the Bike
Long press power button again to turn off the unit and all LED indicators.
PEDAL ASSIST MODES
Switching Assist Levels
Momentarily press the power button to cycle through 5 pedal assist levels.
OPERATION AND SAFETY INSTRUCTIONS
General Safe Use Guidelines
Important personal safety, load limits, weather considerations, and electric bicycle usage rules.
Precautions for Safe Riding
Check bike components, ride safely in conditions, wear protective gear, and perform maintenance.
Safe Washing Procedures
Wash LZR carefully to avoid damage; pay attention to brake function after washing.
MAINTENANCE AND TROUBLESHOOTING
Inspecting Key Components
Check handlebars, wheels, brakes, and power circuit for proper function and tightness.
Seat and Reflector Checks
Ensure correct seat adjustment and check reflectors for dirt or damage.
Axle, Tire, and Pedal Maintenance
Verify secure axles, proper tire inflation/wear, and smooth pedal rotation.
Charge Port Inspection
Confirm charge port is undamaged, clear of debris, and not deformed.
LIMITED MANUFACTURER'S WARRANTY
Warranty Terms and Coverage
Details on warranty coverage, what voids it, and requirements for claims.
Obtaining Support and Information
Contact ONYX via phone, email, or website for support or warranty inquiries.
Proper Frame Sizing
Frame Fit Clearance
Ensure at least 1 inch clearance between the top tube and rider's crotch for correct frame fit.
Need help?
Do you have a question about the LZR 500W and is the answer not in the manual?
Questions and answers