Toro Grandstand 78527 Installation Instructions Manual

48in, 52in, or 60in Blower and Drive Kit
Grandstand
Model No. 78525—Serial No. 400000000 and Up
Model No. 78526—Serial No. 400000000 and Up
Model No. 78527—Serial No. 400000000 and Up
Note:
Install this kit to use with the E-Z Vac Twin Bagger; refer to the Operator's Manual for the bagger
for safety, operation, and maintenance procedures.
Important:
For Grandstand machines with the serial ranges listed below, engage the clutch at least
50 times before installing and operating the Blower and Drive Kit.
• Model 74513—Serial number 405291650 and before
• Model 79518—Serial number 405291708 and before
• All other models—Serial number 405453838 and before
Ensure to engage the clutch at least 45 seconds and disengage it at least 15 seconds each time. This
can be accomplished through normal use of the machine before installing the kit.
Use of this product may cause exposure to chemicals known to the State of California
to cause cancer, birth defects, or other reproductive harm.
Safety
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Mower
Proposition 65 Warning
133-8061
Register at www.Toro.com.
WARNING
CALIFORNIA
decal133-8061
Form No. 3435-684 Rev A
Installation Instructions
Original Instructions (EN) All Rights Reserved *3435-684* A
Printed in the USA