NorthStar SMARTCRAFT GATEWAY Manual page 24

4-7-3 Steering angle setup and
calibration
Set up and calibrate the SmartCraft steering angle
display. Press
displayed, then select SmartCraft, then select
Steering angle. The options are:
Installed
Select: Steering angle sensor installed.
De-select: No steering angle sensor installed.
Polarity
Steer the boat to port. If the steering angle pointer
does not move to port, choose the other polarity
(Normal or Inverted).
Calibrate
1 There must be little wind and little current.
Travel at a typical cruising speed.
Steer in a straight line, then select Cali-
2
brate to calibrate the steering angle.
3 Press enter when steering in a straight line.
26
until the Setup menu is
NAVMAN
SmartCraft gateways Installation and Operation Manual