NorthStar SMARTCRAFT GATEWAY Manual page 13

Gauge setup
Select what data is displayed in the gauges on
the three SmartCraft gauge displays. Note that
the factory default has gauges appropriate to the
type of engine.
1 To select a gauge display. Press
the display name (Small, Medium, Large or
Tanks) turns blue.
2 Press or to select a gauge.
3 Change the gauge:
i Press to display a menu of options for
the selected gauge (see right; the options
available will depend on your engine, see
section 1-1).
ii Press or
press .
4 Repeat steps 1 to 3 to change more gauges,
then press one or more times to return to
the main display.
Header setup
Select what data is displayed in the header data on
the four SmartCraft displays. The display shows the
header, with the selected data item highlit.
1 Press or to select the header item to
change.
2 Change the item:
i Press to display a menu of options for
the selected item (see right; the options
available will depend on your engine, see
section 1-1).
ii Press or
press .
3 Repeat steps 1 and 2 to change more header
items, then press
return to the main display.
SmartCraft gateways Installation and Operation Manual
or
to select an option, then
to select an option, then
one or more times to
until
NAVMAN
15