Related Manuals for AGC MATELAC
Summary of Contents for AGC MATELAC
- Page 1 LACOBEL / MATELAC PROCESSING GUIDE VERSION 1.0 – SEPTEMBER 2019 Please check http://agc-tas.com/ regularly for updates. AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019...
-
Page 2: Table Of Contents
13. ACID ETCHING 14. BENDING ..................................15. SCREEN PRINTING AND ENAMELLING ......................................................16. INSULATED GLAZING ........................17. PACKING THE PROCESSED PRODUCT ..................................18. CLEANING DISCLAIMER .................................... AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019... -
Page 3: Introduction
1. INTRODUCTION The purpose of this guide is to ensure that users of Lacobel/Matelac glass are able to process the product correctly - cutting, edge shaping, etc. - so that it meets the end-user's requirements in full. Lacobel/Matelac is a decorative glass that needs careful handling. -
Page 4: Storage Prior To Handling
• Lacobel / Matelac must be stored in a dry, well-ventilated area to avoid large fluctuations in temperature and humidity can cause condensation on the glass. Variations in such conditions may occur in the cargo area and demolition. -
Page 5: Quality Control
Lacobel/Matelac is manufactured in factories that are ISO 9001: 2015 certified (certificate available upon request). There is not yet a published EN standard for painted glass. Lacobel/Matelac packs must be inspected immediately upon arrival. AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019... -
Page 6: Cutting
AGC provides this information for advisory purpose. The user/customer is solely responsible for using this advice. 8. EDGE PROCESSING & DRILLING Lacobel/Matelac can be shaped in any way. Below is a partial list of the different kinds of shaping options. Edge grinding... -
Page 7: Washing
Safety backed Lacobel/Matelac cannot be bent. Lacobel/Matelac and safety backed Lacobel/Matelac can resist to an absolute temperature of 80°C and can resist a relative temperature difference of 30°C within one sheet. AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019... -
Page 8: 15. Screen Printing And Enamelling
18. CLEANING For detailed cleaning instructions, please consult the “Cleaning and Maintenance Guide – Decorative Glazing” in the Lacobel or Matelac section on http://agc-tas.com/. AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019... -
Page 9: Disclaimer
AGC Glass Asia accepts liability for the product it supplies in accordance with its general sales conditions. AGC Asia // Lacobel / Matelac – Processing Guide – Version 1.0 - Aug 2019...
Need help?
Do you have a question about the MATELAC and is the answer not in the manual?
Questions and answers