Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Visionary D4200
Summarization of Contents
Introduction and Prerequisites
NETWORK AV INFRASTRUCTURE PREREQUISITES
Essential networking technologies and infrastructure requirements for system installation.
NETWORK PROTOCOLS
Explanation of network data transmission protocols like Unicast and Multicast.
Installation and System Examples
INSTALLATION AND CONNECTIONS (SYSTEM EXAMPLES)
Guides for connecting E4200/D4200 endpoints in various system configurations.
ONE SOURCE TO ONE DISPLAY
Basic installation scenario for a single source to a single display.
ONE SOURCE TO MANY DISPLAYS
Setup for transmitting video from a single source to multiple displays.
MANY SOURCES TO MANY DISPLAYS
Configuration for multipoint-to-multipoint video distribution.
MANY SOURCES TO MANY DISPLAYS WITH USB OVER IP (KVM)
System setup for remote access and control using USB over IP.
Network Configuration
NETWORK DISCOVERY
Process for locating and identifying E4200/D4200 devices on the network.
CONFIGURING ENCODER AND DECODER IP ADDRESSES
Steps to assign static or DHCP IP addresses to encoders and decoders.
VLAN TRUNK MODE
Enabling trunk mode to separate network traffic for different VLANs.
CONFIGURING STREAM SETTINGS (MANUALLY)
Manual configuration of stream modes, including Unicast and Multicast.
Advanced Configuration
USB OVER IP (KVM)
Enabling and configuring USB device connectivity over the IP network.
RS-232 OVER IP
Configuration for serial data transmission over the IP network.
CEC OVER IP (DECODER ONLY)
Controlling CEC-enabled displays via IP from the decoder.
VIDEO WALL
Setting up decoders to create a video wall display configuration.
CUSTOMIZING THE EDID
Importing custom EDID files to manage video and audio formats.
Device Options and Settings
E4200 ENCODER NETWORK TAB
Network settings and status for the E4200 encoder unit.
E4200 ENCODER CONFIGURATION TAB
Configuration options for the E4200 encoder, including streams and video settings.
D4200 DECODER NETWORK TAB
Network settings and status for the D4200 decoder unit.
D4200 DECODER CONFIGURATION TAB
Configuration options for the D4200 decoder, including streams and video settings.
Control Software
VISION LITE
Installation and usage guide for the Vision Lite control and routing software.
Troubleshooting
FACTORY DEFAULT SETTINGS
Procedure to reset units to factory default configurations.
DIAGNOSTICS PAGE
Accessing and interpreting diagnostic information for units.
NETWORK INFO
Displays current network link speed and LLDP information.
VIDEO INFO
Shows current video resolution, refresh rate, scan mode, and HDCP status.
AUDIO INFO
Displays current audio codec, type, sample frequency, and size.
Product Specifications
Encoding / Decoding
Technical details on video compression, bit rates, and latency.
Video
Specifications for video resolutions, input/output types, and scaling.
Audio
Details on audio input/output types, formats, and conversions.
Connectors
Physical connector types and specifications for the devices.
Need help?
Do you have a question about the D4200 and is the answer not in the manual?
Questions and answers