8000I; 8000I Nmea 0183 Heading; 8000I Simnet / Nmea2000 Heading - Navico BR24 - INSTALLATION REV D Installation Manual

RI11 Adapter cable
NETWORK port 000-0127-56 2
m (6 ft)
Connects to 8000i system via Ethernet. Connect 8000i Ethernet cable in between 8 port linker (or cross-
over cable) and supplied adapter cable. Use only 8000i/GB40 Ethernet cables. (Order separately)
Max Ethernet cable length from RI11 box to switch/display is 50 m.
NMEA 0183 Heading
Sensor
For MARPA functionality, heading information at 10 Hz needs to be sent to both the RI11 and the master
NavComputer. Use the 12 pin cable AA010070 cable from both units to a junction box to share the same
heading source. (1x AA010070 ships with 8000i/GB40. Order separately for BR24)
Heading sensor AT10HD
FC40 or RC42 24006694
For MARPA functionality, heading information at 10 Hz needs to be sent to both the RI11 and the master
NavComputer. AT10HD (optional) connects to RI11 providing fast heading from SimNet or NMEA 2000
backbone. AT10 (optional) connects to the 12 pin Utility cable (AA010070) of the 8000i.

8000i

12" Display processor or Black box processor
Ethernet cable
AA010079
AA010009 (AA010084)
0.6 m (2 ft)

8000i NMEA 0183 Heading

12" Display processor, Black box processor, or Simrad GB40 not
using a SimNet heading sensor
Junction Box

8000i SimNet / NMEA2000 Heading

12" Display processor, Black box processor connecting to a SimNet or
NMEA2000 heading sensor
RI11 AT10
COMMS 24005936
8 port Ethernet linker
(or cross-over cable)
RI11 8000i NavComputer
COMMS port
Junction box 8000i NavComputer
2BWiring the radar system | 19
8000i
NETWORK port
Utility port
Utility port