RI11
COMMS port
Connects to NX40/45 or M84/121 via RS232 using the supplied data cable.
SimNet heading sensor
FC40 or RC42
Optionally, for accurate radar chart overlay, a heading sensor on the SimNet backbone passes through
the AT40 or AT45 which connects to the GPS port on the NX display.
NMEA 0183
Junction box
heading sensor
Optionally, for accurate radar overlay use an NMEA 0183 heading sensor. Use optional connection kit.
NX40, NX45
M84, M121
Data cable
AA010114
3 m (9.8 ft)
NX40, NX45 SimNet Heading
AT40 or AT45 SimNet to NMEA 0183
converter
M84, M121 NMEA 0183 Heading
RI11
Connection kit AA010112
COMMS port
NX or M series
RADAR port
M84 or M121 Display
Consisting of cables,
AA010114/15/16
2BWiring the radar system | 17
NX40 or NX45
GPS port
Radar port