Connect The Broadband Radar To Your Display; Hds (Usa Only); Hds (Non Usa); Hds Nmea 2000 Heading - Navico BR24 - INSTALLATION REV D Installation Manual

Connect the Broadband radar to your display

Broadband radar scanner
Lowrance broadband radar in the United States does not require a radar interface box. The scanner
connects directly the display or Ethernet switch via the adapter cable.
NETWORK port
Lowrance Broadband radar outside the USA requires a RI11 interface box. This connects to HDS display
via Ethernet either directly into the ENET port on the display or by using an optional 5 port Ethernet
switch. An additional Ethernet cable will be required.
SimNet heading sensor
FC40 or RC42
16 | 2BWiring the radar system

HDS (USA only)

Adapter cable

HDS (Non USA)

RI11 Ethernet cable
000-0127-28

HDS NMEA 2000 Heading

SimNet to NMEA2000 adapter
Optional Lowrance 5
Port Ethernet switch.
000-0127-56
2 m (6 ft)
Optional Lowrance 5
port Ethernet switch.
2 m (6 ft)
cable.
000-0127-45
HDS Display
ENET Port
NEP-1
HDS Display
ENET port
NEP-1
HDS
NMEA 2000 port