Table of Contents
Advertisement
Quick Links
System 3000
RF operating top unit
RF operating top unit, 1-gang
Order no.: 5104 .., 5105 .., 5106 ..
RF operating top unit, 2-gang
Order no.: 5107 .., 5108 ..
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
The radio communication takes place via a non-exclusively available transmission path, and is
therefore not suitable for safety-related applications, such as emergency stop and emergency
call.
These instructions are an integral part of the product, and must remain with the end customer.
32403802
10867449
10.11.2021
1 / 12
Advertisement
Table of Contents
Related Manuals for Gira 5106 Series
Summarization of Contents
Operating Instructions
Safety Instructions
General safety warnings for electrical devices, electric shock, and non-safety-related applications.
Device Components
Component Identification
Identifies rockers, status LED, cover frame, and insert for 1-channel and 2-channel units.
Function
System Information and Capabilities
Details on KNX compliance, firmware updates, KNX Data Secure, and range considerations for the RF system.
Intended Use and Product Features
Describes operational capabilities, including load control, blind operation, scene management, and key product characteristics.
Operation
Operation Concepts
Explains configuring rocker or button functions for single-area and dual-area operation modes.
Standard Application Examples
Provides examples of button actions for switching, dimming, blind control, and scene management.
Insert-Cover Alignment
Alignment Cases and Functionality
Details functional and non-functional states based on combinations of new/used inserts and covers.
Error Reporting and Resolution
Explains how status LED indicates alignment errors and the need for ETS for correction.
Delivery State
Status LED Behavior
Describes the function of status LEDs in the delivery state, acting as an actuation indicator.
Information for Electrically Skilled Persons
Fitting and Electrical Connection
Provides safety warnings and instructions for mounting, connecting, and switching on the device.
Commissioning
Physical Address and Application Program
Guides on programming the physical address and application program using ETS.
Application Program Programming Details
Explains status LED behavior during and after application program installation.
Safe-state Mode and Master Reset
Safe-state Mode Operations
Details how to activate, deactivate, and use the safe-state mode for troubleshooting.
Master Reset Procedure
Explains how to perform a master reset to restore factory settings and basic device configuration.
Need help?
Do you have a question about the 5106 Series and is the answer not in the manual?
Questions and answers