Extracting Acronis True Image Echo Server Components; Running Acronis True Image Echo Server; Removing Acronis True Image Echo Server - ACRONIS TRUE IMAGE ECHO - SERVER FOR WINDOWS User Manual

Acronis Universal Restore can be installed on a networked computer either locally, by
running the setup program, or remotely, using one of remote installation services such as
Systems Management Server (a component of Microsoft Windows NT BackOffice program
package).
After installation, Acronis Universal Restore automatically plugs in one or more of above
program components. Acronis True Image Echo Server name, displayed in its main
window, changes to Acronis True Image Echo Server with Universal Restore.

2.3 Extracting Acronis True Image Echo Server components

When installing Acronis True Image Echo Server, you can save the setup (.msi) file on a
local or network drive. This will help when modifying or recovering the existing product
installation.
To save the setup file:
run the Acronis True Image Echo Server setup file
•
in the Install Menu, right-click on the program name and select Extract
•
select a location for the setup file and click Save.
•

2.4 Running Acronis True Image Echo Server

You can run Acronis True Image Echo Server in Windows by selecting Start ->
Programs -> Acronis -> Acronis True Image Echo Server -> Acronis True
Image Echo Server or clicking the appropriate shortcut on the desktop.
If your operating system fails to load, you can run Acronis Startup Recovery Manager.
However, this must be activated
to learn more about this procedure. To run the program, press F11 during the server
bootup when you see a corresponding message that tells you to press that key. Acronis
True Image Echo Server will be run in the standalone mode, allowing you to recover the
damaged partitions.
If your disk data is totally corrupted and you cannot boot (or if you have not activated
Acronis Startup Recovery Manager), load the standalone Acronis True Image Echo Server
version from the bootable media (created by you using Rescue Media Builder) or RIS-
server. Then you will be able to restore the disk from a previously created image.

2.5 Removing Acronis True Image Echo Server

You can remove Acronis True Image Echo Server by selecting Control panel -> Add or
remove programs -> <Acronis True Image Echo Server> -> Remove. Then
follow instructions on the screen. You may have to reboot your computer afterwards to
complete the task.
In case you remove Acronis True Image Echo Server from the system, there is an option
to keep the Acronis Secure Zone along with its contents (which will enable data recovery
on booting from bootable media) or remove Acronis Secure Zone.
14
prior 3.4 Acronis Startup Recovery Manager
to use; see
Copyright © Acronis, Inc., 2000-2009