Trueimagecmd.exe Usage Examples - ACRONIS TRUE IMAGE 9.1 - WORKSTATION User Manual

Specifies a user name when verifying an image from a network drive.
/net_password:[password]
Specifies a user password when verifying an image from a network drive.
11. help
Shows help for commands.

15.1.2 trueimagecmd.exe usage examples

1. Create image
trueimagecmd /create /filename:"C:\Test\1.tib" /partition:2-
1,1-3
• This will create an image named 1.tib of the partitions 2-1 and 1-3. Image will be saved
to c:\Test\ folder.
trueimagecmd /create /filename:"\Test\1.tib" /partition:2-1,1-
3 /file_partition:3-1
• This will create an image named 1.tib of the partitions 2-1 and 1-3. Image will be saved
to partition 3-1.
trueimagecmd /create /filename:"C:\Test\1.tib"
/password:qwerty /harddisk:2 /reboot /raw /incremental
/compression:5 /split:640 /progress:off
• This will append an incremental image to the image named 1.tib of hard disk 2. The
image will be saved to c:\Test\ folder, protected with password "qwerty", split into parts
of 640 MB, and contain all cluster data. Image compression level is 5. The workstation
will be rebooted after the operation is completed.
2. Restore image
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1
• This will restore partition 2-1 from image 1.tib.
trueimagecmd /deploy /filename:"C:\Test\1.tib"
/password:qwerty /harddisk:2
• This will restore hard disk 2 from image 1.tib, protected with password 'qwerty'.
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1
/target_partition:1-1
• This will restore partition 2-1, stored in image 1.tib, to partition 1-1.
trueimagecmd /deploy /filename:"C:\Test\1.tib" /partition:2-1
/target_harddisk:3 /start:0 /size:64000 /type:logical
• This will restore partition 2-1, stored in image 1.tib, to hard disk 3. A new logical partition
will be created on disk 3 from 0 to 64000 sector.
trueimagecmd /deploy /filename:z:\Server30Cdrive.tib
/partition:1-1 /target_partition:2-1 /type:active
/password:123qwe
Copyright © Acronis, Inc., 2000-2006 107