ACRONIS TRUE IMAGE 9.1 - WORKSTATION User Manual page 104

/password:[password]
Specifies the password for the image file (if required).
/harddisk:[disk number]
Specifies the hard disks to restore by numbers.
/partition:[partition number]
Specifies the partitions to restore by numbers.
/target_harddisk:[disk number]
Specifies the hard disk number where the image will be restored.
/start:[start sector]
Sets the start sector for restoring a partition to the hard disk unallocated space.
/size:[partition size in sectors]
Sets the new partition size (in sectors).
/type:[active | primary | logical]
Sets the new partition type. By default (if this option is not defined) an active partition is
created on the first hard disk and logic partitions on other disks.
/target_partition:[partition number]
Specifies the target partition number for restoring a partition over the existing one. If the
option is not specified, the program assumes that the target partition number is the same as
the partition number specified with the /partition option.
/reboot
Reboots the workstation after the operation is completed.
/log:[file name]
Creates a log file of the current operation with the specified file name.
3. list
Lists the available drives and partitions.
Options
/filename:[filename]
Lists the image file contents.
/password:[password]
Specifies the password for the image file (if required).
4. clone
Clones a hard disk.
Options
/harddisk:[disk number]
Specifies a source hard disk which will be cloned to the new hard disk.
104 Copyright © Acronis, Inc., 2000-2006