Table of Contents
Advertisement
You can disconnect from a remote PC after accomplishing all necessary
operations. Click on Disconnect in the Remote Management sidebar.
3.3
Installing Acronis components on a remote PC
Acronis Snap Deploy Management Console allows you to install Acronis
components onto remote computers located in a corporate network. For
example, Acronis Snap Deploy Management Agent installed on a remote
computer allows you to access to it from Acronis Snap Deploy Management
Console for master image creation, managing files and executing applications.
To install any Acronis component to a remote machine, you will need
administrator rights on it.
To install Acronis components:
1. Select Install Acronis components in the Acronis Snap Deploy
2. Select the installer location from the list (Registered Components,
3. Select the Acronis component you want to install.
4. Specify License Server for license validation. It can be found
5. Specify the network name or IP address of the machine on which the
6. The Acronis component will be installed to the remote PC you
7. If
Copyright © Acronis, Inc., 2000-2006
Figure 5. Establishing connection with a remote PC
Management Console main window.
Search removable media or Specify location).
automatically in the local network or can be specified manually.
Acronis component is to be installed. You can also select a PC from the
list of available ones using the Browse... button. At that point, you
will have to provide an administrator user name and password.
specified.
you
checked
automatically box during Acronis components installation, the
remote machine will reboot. Otherwise, you will see the corresponding
message.
the
Allow
to
reboot
Pre-deployment operations
remote
computer
19
Advertisement
Table of Contents
