ACRONIS SNAP DEPLOY Manual page 11

Snap Deploy Management Agent and Acronis License Server) on one PC or
each component on a separate networked computer.
Before installing other Acronis components, you need to install the Acronis
License Server and import license serial numbers to it (see section 2.8 of this
Guide).
The installation procedure may differ from the one described below,
depending on the component.
To install an Acronis Snap Deploy component:
1. Run AcronisSnapDeploy.exe.
2. In the Install Menu, select the component that you are going to install
on a current PC. Available options are: Acronis Snap Deploy Management
Console, Acronis OS Deploy Server, Acronis PXE Server, Acronis Snap
Deploy Management Agent or Acronis License Server.
3. Read and accept the terms of the license agreement, then click Next.
4. In the Specify License Server window, you should specify the License
Server for license validation. It can be found automatically on the local
network or can be specified manually.
5. In the Choose setup type window, choose setup type:
6. In the Select Administrators Options window, choose Install for all
users or Install for the currently logged-in user, then click Next.
7. Click Proceed to begin installation.
Copyright © Acronis, Inc., 2000-2006
Typical -- installs most common program features (recommended for
most users).
Custom -- allows users to choose program features to install and select
a location for setup (recommended for advanced users).
Complete -- all program features will be installed (requires the most
disk space).
Figure 1. Acronis Snap Deploy Install Menu
Installation and operation
11