-c or --norpm
Uses the installation file's own RPM Package Manager and not the operating system's package
manager. Specify this parameter when installing the component on a system which does not use
RPM Package Manager—such as an Ubuntu system.
-d or --debug
Puts verbose information to the installation log.
-i ComponentName or --id=ComponentName
Specifies the name of the component being installed:
For the installation file AcronisAgentLinux.i686: BackupAndRecoveryAgent
For
the
BackupAndRecoveryBootableComponents
For the installation file AcronisManagementConsoleLinux.i686: ManagementConsole
For the installation file AcronisDeduplication.i686: Deduplication
For the installation file AcronisUpgradeTool.i686: AcronisUpgradeTool
-e {0|1} or --ssl={0|1}
Applies only to the installation file AcronisAgentLinux.i686.
Specifies whether to enable authentication for connection to other components. Authentication
is performed by using Secure Socket Layer (SSL) certificates.
The possible values are:
0: Do not use authentication
1: Use authentication
-C ManagementServer or --ams=ManagementServer
Applies only to the installation file AcronisAgentLinux.i686.
Specifies the name or IP address of the Acronis Backup & Recovery 10 Management Server.
When using this parameter, you need to specify the user name and password of a management
server administrator by using the -g and -w parameters, respectively.
The machine will be registered on the management server after the installation is complete.
-g UserName or --login=UserName
Applies only to the installation file AcronisAgentLinux.i686.
Specifies the user name of a member of the Acronis Centralized Admins group on the
management server whose name is given by ManagementServer.
-w Password or --password=Password
Applies only to the installation file AcronisAgentLinux.i686.
Specifies the password for the user whose name is given by UserName.
-p PortNumber or --port=PortNumber
Copyright © Acronis, Inc., 2000-2009
installation
file
AcronisBootableComponentsMediaBuilderLinux.i686:
29
Need help?
Do you have a question about the Backup & Recovery 10 Advanced Server Virtual Edition and is the answer not in the manual?