Installation In Linux; Installation Procedure - ACRONIS Backup & Recovery 10 Advanced Server Virtual Edition Installation Manual

3. Select the agent's setup file in the shared folder that you previously created, and then click Open.
4. In the Deploy Software dialog box, click Advanced, and then click OK.
5. If you are reinstalling or updating the agent, do nothing.
If you are installing the agent, do the following: on the Modifications tab, click Add, and then
select the modification—also called transform—that you previously created; the transform file
has the name AcronisAgentWindows.mst and is located in the same folder as the agent's
installation package.
6. Click OK to close the Deploy Software dialog box.

2.6. Installation in Linux

This section describes installation of Acronis Backup & Recovery 10 components on a machine
running Linux.
By using command-line parameters, you can choose between the interactive and unattended
installation modes.
2.6.1.

Installation procedure

Preparation
Before proceeding with installation, you need to extract the installation files and assign them
necessary access permissions:
1. On a machine running Windows, run the Acronis Backup & Recovery 10 setup file.
2. Click Extract installation files.
3. In the list of installation files, select the following check boxes:
Agent for Linux (AcronisAgentLinux.i686)
o
Bootable Media Builder (AcronisBootableComponentsMediaBuilderLinux.i686)
o
Management Console for Linux (AcronisManagementConsoleLinux.i686)
o
Deduplication (AcronisDeduplication.i686)
o
UpgradeTool (AcronisUpgradeToolLinux.i686)
o
Note: You need Acronis Backup & Recovery 10 Upgrade Tool only if you are upgrading from Acronis True
Image Echo.
4. Copy the installation files (.i686 files) to a directory on the machine where you want to install the
components.
5. Go to the directory where you copied the installation files, and then run the following command:
chmod 777 Acronis*.i686
Installation
To install Acronis Backup & Recovery 10 Agent for Linux or Acronis Bootable Media Builder
1. Make sure that the licenses for Acronis Backup & Recovery 10 Agent for Linux are imported to the
Acronis License Server.
2. Run the installation file:
26 Copyright © Acronis, Inc., 2000-2009