Hardware Requirements - ACRONIS Backup & Recovery 10 Advanced Server Virtual Edition Installation Manual

•
Windows 7 - all editions except for the Starter and Home editions
Acronis Backup & Recovery 10 Agent for Linux
•
Linux with kernel 2.4.20 or later (including 2.6.x kernels) and glibc 2.3.2 or later
•
Various Linux distributions, including:
Red Hat Enterprise Linux 4 and 5
o
CentOS 4 and 5
o
Fedora 9 and 10
o
Ubuntu 8.10 (Intrepid Ibex) and 9.04 (Jaunty Jackalope)
o
Debian 4 (Lenny) and 5 (Etch)
o
SUSE Linux Enterprise Server 10
o
openSUSE
o
Asianux
o
•
x64 versions of the above Linux distributions and other Linux distributions are also supported.
The agent for Linux is in fact a 32-bit executable. For authentication, the agent uses system
libraries, 32-bit versions of which are not always installed by default with 64-bit distributions.
When using the agent on a 64-bit RedHat based distribution, such as RHEL, CentOS, Fedora or
Scientific Linux, make sure that the following 32-bit packages are installed in the system:
pam.i386
libselinux.i386
libsepol.i386
These packages should be available in the repository of your Linux distribution.

1.3. Hardware requirements

This section lists the minimum and recommended hardware requirements to install and run Acronis
Backup & Recovery 10 components.
Acronis Backup & Recovery 10 Management Console
Item
Computer processor
System memory
Screen resolution
Installation disk space
Other hardware
Copyright © Acronis, Inc., 2000-2009
Minimum requirements
Modern processor, 800 MHz or faster
Itanium platforms are not supported
128 MB
800*600 pixels
50 MB
Mouse
Recommended
1 GHz 32-bit (x86) or 64-bit (x64)
processor
512 MB or more
1024*768 pixels or higher
Network interface card or a virtual
network adapter
CD-RW/DVD-RW drive for bootable
media creation
11