ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - UPDATE 3 User Manual page 371

Hide thumbs Also See for BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - UPDATE 3:
Table of Contents

Advertisement

Volume C:
System volume
Boot volume
All fixed volumes
First partition on the
first IDE hard disk of
a Linux machine
First partition on the
first SCSI hard disk of
a Linux machine
First partition on the
first software RAID
hard disk of a Linux
machine
The names of templates are case-sensitive.
What does a disk or volume backup store?
For supported file systems, a disk or volume backup stores only those sectors that contain data. This
reduces the resulting backup size and speeds up the backup and recovery operations.
Windows
371
Type C:\ or select it from the list
Type or select: [SYSTEM]
Type or select: [BOOT]
Type or select: [Fixed Volumes]
Type or select: /dev/hda1
Type or select: /dev/sda1
Type or select: /dev/md1
The system volume contains the hardware-
specific files that are needed to start
Windows, such as Ntldr, Boot.ini, and
Ntdetect.com.
There is only one system volume even if
multiple Windows operating systems are
installed on the computer.
For more details, see "Note on Windows
machines" below.
Refers to the registered machine's boot
volume.
The boot volume contains the Windows
folder and the supporting files for the
Windows operating system (typically
located in the Windows\System32 folder).
It may or may not be the same as the
system volume.
If multiple operating systems are installed
on the computer, this is the boot volume of
the operating system in which the agent is
working.
For more details, see "Note on Windows
machines" below.
Refers to all volumes other than removable
media. Fixed volumes include volumes on
SCSI, ATAPI, ATA, SSA, SAS and SATA
devices, and on RAID arrays.
Linux volumes
hda1 is the standard device name for the
first partition of the first IDE hard disk
drive. For more details, see "Note on Linux
machines" below.
sda1 is the standard device name for the
first partition of the first SCSI hard disk
drive. For more details, see "Note on Linux
machines" below.
md1 is the standard device name for the
first partition of the first software RAID
drive. For more details, see "Note on Linux
machines" below.
Copyright © Acronis, Inc., 2000-2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Backup & recovery 10 advanced server virtual edition

Table of Contents