Parameters Set Through Gui; Parameters Set Through Windows Registry - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - UPDATE 3 User Manual

The information will not be sent.
Disabled
The same as Not configured.
7.2.2

Parameters set through GUI

The following parameters can be set through the graphical user interface (GUI):

For Acronis Backup & Recovery 10 Management Server: Collecting Logs, Windows Event Log,
SNMP, SNMP Address, and SNMP Community

For Acronis Backup & Recovery 10 Agent: Windows Event Log, SNMP, SNMP Address,
SNMP Community and Customer Experience Program
You will find the description of these parameters in the correspondent topic about configuration
through the administrative template.
7.2.3

Parameters set through Windows registry

The following are the parameters of Acronis Backup & Recovery 10 Storage Node that can be set only
by editing the registry.
Parameter related to deduplication
CompactingTriggerThreshold
Description: Specifies the percentage of used items in the data stores below which compacting
occurs.
Possible values: Any integer number between 0 and 100
Default value: 80
Registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\ASN\Configuration\StorageNode\CompactingTrigge
rThreshold
As backups are deleted from a deduplicating vault, its deduplication data stores (p. 76) may
contain unused items: files or disk blocks that are no longer referred to from any backup. The
storage node processes both data stores in turn to delete the unused items. This operation is
called compacting.
Since compacting is a resource-consuming operation, it should occur only when the number of
unused items is significant.
The CompactingTriggerThreshold parameter enables you to set up a balance between the extra
space required to store unused items and the compacting frequency. The larger the value of this
parameter, the fewer unused items are allowed in the data stores, but compacting will likely be
more frequent.
This parameter applies separately to disk-level and file-level backups. So, compacting may be
performed for one data store and skipped for the other.
Parameters related to vault databases
The following two parameters determine paths to Acronis Backup & Recovery 10 Storage Node's
internal databases, which contain information about managed vaults.
The database that is located in the folder specified by the DatabasePath parameter is typically small.
However, the database that is located in the folder specified by the TapeDatabasePath parameter
366 Copyright © Acronis, Inc., 2000-2010