ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER - UPDATE 3 User Manual page 353

Disabled
Encryption is disabled; any connection to a client application which requires encryption will
not be established.
Required
Data transfer will be performed only if encryption is enabled on the client application (see
"Client Encryption options"); it will be encrypted.
Authentication parameters
In Use Agent Certificate Authentication, select one of the following:
Do not use
The use of SSL certificates is disabled. Any connection to a client application which requires
the use of SSL certificates will not be established.
Use if possible
The use of SSL certificates is enabled. The server will use SSL certificates if their use is
enabled on the client application, and will not use them otherwise.
Always use
The use of SSL certificates is enabled. The connection will be established only if the use of SSL
certificates is enabled on the client application.
Disabled
The same as Not configured.
Event tracing parameters
In Windows, the events occurring in Acronis Backup & Recovery 10 can be recorded into the event
log, a file, or both.
Each event has a level from zero to five based on the event's severity, as shown in the following
table:
Level Name
0 Unknown
1 Debug
2 Information
3 Warning
4 Error
5 Critical
Event tracing parameters are specified as the following settings in the administrative template:
File Trace Minimal Level
353
Description
Event whose level of severity is unknown
or not applicable
Event used for debug purposes
Informational event, such as one about
the successful completion of an operation
or startup of a service
Event which is a possible impending
problem, such as low free space in a vault
Event that resulted in a loss of data or
functionality
Event that resulted in the termination of a
process such as the agent's process
Copyright © Acronis, Inc., 2000-2010