Table of Contents
Advertisement
3. Under What to recover, in Archive, click Change.
4. In the list of locations, click Online backup storage.
5. Click Log in and specify the credentials to log in to the online storage.
6. Select the archive from which you want to recover data. Files can be recovered from file-level
backups only.
7. Click OK to close the dialog box.
8. In Content, click Change and then select the files that you want to recover. By default, all files are
selected.
Details. Here, you can specify the date and time to which you want to revert your files if there is
more than one backup in the archive.
9. Under Where to recover, in Destination, click Change, then click New location, and then specify
the folder to recover the files to. Or you can select this folder from the folder tree.
Tip. By default, the program recovers files to the location from which they were backed up. This
may require a reboot if some of the files are locked by the operating system.
10. Click OK to immediately start the recovery.
9.2 Recovering using Large Scale Recovery
In these steps, you will recover a machine's system and boot volumes from a disk backup. You will use
the Large Scale Recovery service to retrieve backups from the online storage on a hard disk instead of
over the Internet.
You need a separate license, called a Large Scale Recovery license, for each machine whose backups
you want to retrieve in this way.
Note: Recovering a system volume requires a machine reboot.
To recover data using Large Scale Recovery
Retrieving backups
Perform these steps on the account management Web page:
1. Buy a Large Scale Recovery license, if you do not yet have one.
2. Place a large scale recovery order, specifying:
The machine whose backups you want to retrieve
The address where you want the hard drive to be sent
After placing the order, wait until the hard drive arrives. The hard drive remains yours.
Recovering data
Note: The following steps assume that the system is bootable and that the agent is operational on the machine.
In case the system is corrupted, you must use a bootable media. To recover the system, boot the machine using
this media and perform similar steps.
1. Attach the hard drive you received to the machine that you want to recover. Or, you can copy
this hard drive's contents to a network share accessible from this machine.
2. Start Acronis Backup & Recovery 10.
3. On the Actions menu, select Recover.
4. Under What to recover, in Archive, click Change. Browse to the attached disk or the network
share and select the archive from which you want to recover data.
24
Copyright © Acronis, Inc., 2000-2010
Advertisement
Table of Contents
