Chapter 6. Restoring The Backup Data Under X Window System; Considerations Before Recovery; Restore Under Os Or Boot From Cd; Network Settings In Rescue Mode - ACRONIS TRUE IMAGE ECHO - FOR LINUX User Manual

Chapter 6. Restoring the backup data
under X Window system
This chapter describes data recovery using Acronis True Image Echo Server GUI under X
Window System. See

6.1 Considerations before recovery

6.1.1 Restore under OS or boot from CD?

As mentioned above (
Echo Server can be run in several ways. We recommend that you first try to restore data
running Acronis True Image Echo Server under Linux, because this method provides more
functionality. Boot from the bootable media only if the operating system does not load.
The boot CD from which you loaded the program does not keep you from using other CDs
with backups. Acronis True Image Echo Server is loaded entirely into RAM, so you can
remove the bootable CD to insert the archive disk.
If a backup image is located on bootable media, you might have a choice of using Acronis
One-Click Restore. This operation always restores the entire physical disk. Therefore, if
your disk consists of several partitions, the partitions which are missing from the image
will be lost. Please make sure that the image contains all disk partitions or you do not
need the partitions that are not imaged before using Acronis One-Click Restore. For more
information on Acronis One-Click Restore see

6.1.2 Network settings in rescue mode

When booted from removable media, Acronis True Image Echo Server may not detect the
network. Such might be the case if there is no DHCP server in your network or your
computer address was not identified automatically for some reason.
To enable connection, specify network settings manually in the window, available at
Tools -> Options -> Network adapters.
Copyright © Acronis, Inc., 2000-2009
Chapter 12. Console mode
2.3 Running Acronis True Image Echo Server
for using console.
), Acronis True Image
5.3.9 Media components
.